KGEAR GH12 User Manual

GH12
12" High Efficiency Coaxial Slim Array Element
Thank you for choosing KGEAR!
To ensure proper operation, please carefully read this
owner's manual and safety instruction before using
the product.
After reading this manual, be sure to keep it for future
reference.
If you have any questions about your new device
please contact K-array customer service
info@kgear.it or contact the local distributor in your
country.
The GH12 is a passive line array element with 12"
coaxial transducer housed in a compact stainless
steel, weather resistant cabinet that benefits from
K-array SAT® Slim Array Technology.
Its cardioid dispersion pattern limits the loss of
energy in unwanted directions. More units can be
joined together to form an array line and scale up the
system.
Designed for high performance outdoor/indoor
applications both for fixed and moving installation for
live events in auditoriums, stadiums, theme parks and
clubs.
To ensure a correct performance GH12 must be driven
by GA43 or GA46 amplifier from KGEAR amplifiers
family.
Unpacking 3mm
0,1in
Each KGEAR device is inspected before leaving the
factory. Upon arrival, carefully inspect the shipping
carton, then examine and test your new device. If
you find any damage, immediately notify the shipping
company. Check that the following parts are supplied
with the product:
1. 1 x GH12
at
337mm
13,3in
Rear Panel
The rear panel of the speaker hosted 2x SpeakON
connector: The connector located at the bottom is
used as input connector for the signal coming from
an amplifier unit or an active subwoofer, while the
one positioned at the top serves as link connector,
108mm
allowing the signal to be distributed to multiple
4,3in
elements in a line array configuration.
68mm
2,7in
33mm
1,3in
53mm
2,1in
LINK NL4
SpeakON port
USER GUIDE
INPUT NL4
SpeakON port