KGEAR GF821 User Manual

GF82 I - GF82A I - GF82T I
8x2" Line Array Column Speaker - Passive - Active - Passive With transformer
Thank you for choosing KGEAR!
To ensure proper operation, please carefully read this
owner's manual and safety instruction before using the
product. After reading this manual, be sure to keep it for
future reference. If you have any questions about your
new device please contact K-array customer service at
info@kgear.it or contact the local distributor in your
country.
GF82 I, GF82T I, GF82A I are the medium-size and
minimalist line array elements of the GF family in a
practical and compact column format and resistant
frame. The GF82 I, GF82T I, GF82A I comprise 8x2"
ferrite magnet woofers closely-spaced into a recycled
ABS enclosure, featuring PAT (Pure Array Technology).
These columns speakers are the perfect solution
for speech reproduction with high definition and
intelligibility, thanks to their directivity and a narrow
vertical dispersion, as well as music reproduction
when coupled with a KGEAR subwoofer.
GF82 I is a 200W line array element with selectable
impedance: low Z - 16 Ω / high Z- 64 Ω.
GF82T I has the feature of an internal transformer
and it is compatible with high voltage lines at 70V or
100V and has different power taps: 4/8/16/32 W @
100V or 2/4/8/16 W @ 70V.
GF82A I is an active speaker with a built-in amplifier
module with a balanced line input, a mute contact and
an auto ON-OFF switch with selectable thresholds,
plus a speaker output to connect another KGEAR
speaker or passive subwoofer from KGEAR GS family.
Unpacking
Each KGEAR device is inspected before leaving the
factory. Upon arrival, carefully inspect the shipping
carton, then examine and test your new device. If
you find any damage, immediately notify the shipping
company. Check that the following parts are supplied
with the product:
• 1 x GF82 I - (GF82A I or GF82T I) line array column
speaker
• 1x Phoenix connectors x GF82 I(Euroblock 1,5/
4-ST-3,81)
• 2x Phoenix connectors x GF82A I(Euroblock 1,5/
4-ST-3,81)
• 1x Phoenix connectors x GF82T I (Euroblock 1,5/
5-ST-3,81 ) with dedicated jumpers to selectable
impedance and connections.
• 2 x Wall mount L-brackets + screws and covers.
x2
USER GUIDE
GF82 I Rear Panel
GF82 I passive speaker is equipped with 1x Phoenix
connector compatible 4 pin - Euroblock 1,5/ 4-ST-3,81.
1
2
3
4