Product Record; Serial Plate Location; Grounding Instructions; Liquefied Petroleum (Propane) Gas Conversion - Kenmore 3102 - Pro 30 in. Gas Cooktop Use And Care Manual

Product Record
In this space below, record the date of purchase, model
and serial number of your product. You will find the model
and serial number printed on the serial plate. This serial
plate is located under the cooktop. See bottom of this
page for the serial plate location.
Model No. 790.
Serial No.
Serial Plate Location
You will find the model and serial number printed on the
serial plate. The serial plate is located under the
cooktop.
Please see the illustration for exact location. Remember
to record the serial number for future reference (See
Product Record above).
Date of purchase
Save these instructions and your sales receipt for future
reference.
Serial plate is
located under
the burner box.
Grounding Instructions
For personal safety, the cooktop must be properly
grounded. For maximum safety, the power cord must be
plugged into an electrical outlet that is correctly polarized
and properly grounded.
DO NOT Operate the cooktop using a 2-prong adapter or
an extension cord. If a 2-prong wall receptacle is the only
available outlet, it is the personal responsibility of the
consumer to have it replaced with a properly grounded 3-
prong wall receptacle installed by a qualified electrician.
See the INSTALLATION INSTRUCTIONS packaged with
This appliance is equipped with a 3-prong
grounding plug for your protection against shock hazard and
should be plugged directly into a properly grounded receptacle. DO
NOT cut or remove the grounding prong from this plug.
Grounding
type wall
receptacl,
Do not, under any /
circumstances, |
cut, remove, or |
bypass the |
grounding prong. S
pply cord with
3-prong grounding plug
Avoid fire hazard or electrical
shock. DO NOT use an adapter plug, an
extension cord, or remove grounding prong from
electrical power cord. Failure to follow this
warning can cause serious injury, fire or death.
Liquefied Petroleum (Propane) Gas Conversion
This appliance can be used with Natural Gas or Propane (L.P.)
Gas. It is shipped from the factory for use with Natural Gas.
If you wish to covert the appliance to LP Gas, use the supplied LP
Gas conversion kit and instructions, contained in an envelope
marked FOR LP/PROPANE GAS CONVERSION. The conversion
must be performed by a Sears or other qualified LP service
dealer following the supplied instructions.
To avoid serious injury or death,
any additions, changes or conversions required
for this appliance to operate with either LP or
Natural Gas must be made by a Sears or other
qualified LP service dealer.
1;