Unitech HT730 Quick Start Manual

Four-Slot Battery Charger
WW
-HT730-
Quick Start Guide
Checking LED Status
Battery Charging Status LED
Power LED
LED Status LED Type
Power LED
Solid Red Light
Battery Charging
Status LED
Power LED
LED Off
Battery Charging
Status LED
Battery Charging
Flashing Red Light
Status LED
Package
Please make sure the following contents are in the gift
box. If something is missing or damaged, please contact
your Unitech representative.
The package contents


Optional Accessories




V1.2
Description
Power supply is
connected.
Battery is being
charged.
Power supply is
not connected.
Battery charging
is completed.
Power supply
is connected
without battery.
HT730 Four-Slot Battery Charger Unit
(PN# 5100-900031G)
Power Supply (12V/ 5A) without power cord
US power cord (PN#1010-601551G)
EU power cord (PN#1550-602333G)
UK power cord (P/N#1550-602689G)
Cradle Hook (PN#383291G)
Charging the Battery
Plug the AC adapter cable into the power jack on the
battery charger, and then plug the other end of the AC
adapter into an electrical outlet.
Put the battery into the charger, and the charger will
automatically detect the presence of batteries and
begin charging.
CAUTION!
•
To ensure the unit working properly, please keep all connectors
away from the contaminants staying inside of them such as dust,
grease, mud, and water. The negligence may cause the unit with
no communication, short circuited, overheated and so on.
•
If the connector is damaged, please ensure the connector is being
fully repaired before using the unit to avoid causing short circuited.