ramia HB-CH1000 Assembly Instructions

Assembly Instructions HB-CH1000/HB-CH1250
A1-24pcs B1-4pcs
10x40 mm 5x80mm
Attention:
Workbench is made from high quality beech wood guaranteeing maximum resistance and long service life
of the bench.
NOTICE:
•The bench must not be left in damp or humid conditions which will cause movement in the wood.
Recommended humidity level max. 60%.
•If you bought workbench without surface treatment, we recommend you to finish the bench by colourless
varnish or oil including the bottom of workbench. Varnish (oil) prevents absorption of surrounding moisture. varnish or oil including the bottom of workbench. Varnish (oil) prevents absorption of surrounding moisture.
Don´t forget to repeat surface treatment each 6 months.
•To increase the stability of your workbench we recommend you to bolt the bench to the floor.
•Each 6 months tighten all screws and bolts
Parts
Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.cz
B2-4pcs B3/1-2pcs B3/2-2pcs
5x50mm 5x25mm M5
.
Packing 1
C-8pcs D-8pcs
M8x60mm M8
Packing 2
E-8pcs F - 1pc Wooden bench dogs
M8
Date
4pcs