Time Button - Morphy Richards IB27015 Operating Instructions Manual

Time button

This is available on both DAB and FM. However not all FM stations
transmit the time signal.
1 Press the TIME button to display the current time and date on the
bottom line of the display. This is transmitted in the radio waves and
is decoded by the unit. If the time cannot be decoded the bottom
line will display '<Time/Date>'.
2 Press INFO button again to display the last info mode, i.e. If rolling
text was displayed before the time button was pressed then the
bottom line will go back to rolling text.
Autotune button
DAB
If the radio is moved to a new location or a new multiplex starts
transmitting then an autotune will need to be carried out.
There is no need to perform an autotune operation if a new station
starts transmitting on a multiplex that has already been tuned to as this
will be done automatically.
There are 2 options: - full and quick. A quick scan (channels 11B to
12D) will scan frequencies in the UK allocation. A full scan will scan
all frequencies available in the DAB bandwidth, (41 channels
numbered 5A to 13F) and will take longer.
1 Press and hold the AUTOTUNE button to perform the full scan.
2 Press and release the AUTOTUNE button to perform a quick scan.
The display will show:
• After the autotune has finished, the radio will return to the previous
station. The stations will be updated in the list and can be selected
by pressing the UP or DOWN buttons.
• The autotune will only add multiplexes. A System reset must be
used to remove a multiplex that cannot now be picked up, i.e. if the
radio has been moved beyond a multiplex range.
FM
To automatically search for the next station.
1 Press and release the AUTOTUNE button to search upwards.
2 Press and hold the AUTOTUNE button to search downwards.
The radio will stop searching when it finds a station of sufficient
strength.
9