Table of Contents
Advertisement
Electrical Requirements
Check the voltage on the rating plate of your DAB digital radio
corresponds with your house electricity supply, which must be A.C.
(alternating current).
If the socket outlets in your home are not suitable for the plug supplied
with this appliance the plug should be removed and the appropriate
one fitted.
Warning: The plug if severed from the mains lead must be
destroyed, as a plug with a bared flexible cord is hazardous if
engaged into a live socket outlet.
Should the fuse in the 13-amp plug require changing a 3-amp BS 1362
fuse must be fitted.
The DAB digital radio will work on mains or can be battery operated
for portable use. When the mains connector is fitted the batteries will
be overridden.
Power supply
Insert the figure of eight connector on the mains lead supplied into the
mains connector. Insert the plug into a mains socket and switch the
socket on.
Installing batteries
(not supplied)
1 Remove the battery compartment cover (located at the rear of the
unit).
2 Insert 4 x D batteries and connect to the terminals (ensure batteries
are inserted correctly). Replace the battery compartment cover.
Warning: If the unit is not to be used for a prolonged period,
remove the batteries to avoid battery leakage. In the inter-
ests of environmental safety: dispose of batteries safely.
Battery low indicator
A warning message will flash on the bottom line of the display when
the battery life is low. When this happens you will need to insert new
batteries. Do not mix old and new batteries and rechargeable with
alkaline batteries.
3
Hide quick links:
Advertisement
Table of Contents
