Subscribe to Our Youtube Channel
Related Manuals for Minka Group minkaAire Pike
Summary of Contents for Minka Group minkaAire Pike
- Page 1 Pike...
- Page 2 2024...
- Page 4 F774L...
- Page 5 INSTALLING THE LIGHT KIT OPERATING THE REMOTE CONTROL/WALL CONTROL CARE OF YOUR FAN TROUBLESHOOTING SPECIFICATIONS INSTALLING THE BLADES TO THE FAN MOTOR ASSEMBLY Circle...
- Page 7 WARNING: To Reduce The Risk Of Fire, Electric Shock Or Injury To Persons, Do Not Use Replacement Parts That Have Not Been Recommended By The Manufacturer (e.g. Parts Made At Home Using A 3D Printer). DL-1170FCS-22 SW-T0004...
- Page 8 Blades (3) (6”) Transmitter + holder +2*mounting screws +2*1.5V 3A Battery Blade screws ( 9 + 1 spare)
- Page 12 1024...
- Page 13 Step 4. If your outlet box has a GROUND wire (Green or Bare Copper), connect this wire to the Hanger Ball and Hanger Bracket and receiver Ground wires. lf your outlet box does not have a Ground Wire, then connect the Hanger Ball and Hanger Bracket and Receiver Ground Wire together.(Fig.13) FIG.13...
- Page 15 INSTALLING THE BLADES TO THE FAN MOTOR ASSEMBLY Step 1. Align the 3 holes from the blade to the flywheel. FLYWHEEL Secure the blade with three blade screws. Step 2. Follow the same process for the remaining two BLADE blades. BLADE SCREW...
-
Page 16: Installing The Light Kit
INSTALLING THE LIGHT KIT Step 1. While holding the 20W LED assembly under your fan, firmly snap the wire connection plugs together. (Fig.16) Step 2. Attach the 20W LED assembly to the switch box by twisting tightly. (Fig.16) NOTE: This is a integrated LED light kit assembly and can not be disassembled to prevent electronic shock. - Page 17 Install two 3A 1.5 volt batteries (included).
- Page 18 FIG. 17...
- Page 19 FIG. 18 FIG. 19...
- Page 23 SYMPTOM Frequency Interference 5.Once the receiver has detected the set frequency, the down light of SOLUTION your fan will blink twice and the fan will begin to rotate for a short 1.Turn the power off to your ceiling fan. period and then shut off. 2.Please use a small size tool to change the frequency 6.The receiver has now learn the frequency which has been selected on the settings on the control system.
- Page 24 0.08 3.51 4.88 7.91 1.909' 0.66 43.28 Circle...
- Page 25 2033 3.51 3875 5499 43.28 Circle...
Need help?
Do you have a question about the minkaAire Pike and is the answer not in the manual?
Questions and answers