Kohler TAUT 74036K-4 Installation Instructions

SERVICE PARTS
74036K-4
Wall Mount Bath Shower Faucet
74035K-4
Wall Mount Shower Faucet
1170944**
1125667**
1218659
1219595**
864104**
1213567
3016381
Others
1181007**
1030624
1216770**
Others
831727**
BL
1065970**
**Color code must be specified when ordering
1277164-K2-D
TAUT
1242786**
833438
1209778**
BL:1245237
1209777 Others:3008523
1292054
74036K:1284457**
74036K:1242725
74036K:1223033**
74036K:3020067
74035K:3016381
74036K:1223039
74035K:1213561
BL
1248781**
1240266
1030624
77420
INSTALLATION INSTRUCTIONS
BEFORE YOU BEGIN
All information is based on the latest product information available at the time of publication. Kohler Co. reserves
the right to make changes in product characteristics, packaging, or availability at any time without notice.
Please leave these instructions for the consumer. They contain important information.
NOTES:
1. Flush the water supply pipes thoroughly to remove debris.
2. Inspect the supply tubing for damage and leakage. Replace and maintain as necessary.
3. Observe local plumbing codes.
4. The minimum inlet water pressure for the diverter is 0.05MPa(0.5bar).
5. The highest working pressure for handspray is 0.5MPa(5 bar). If it exceeds 0.5MPa(5 bar), a pressure reducer is
needed. The highest water and environment temperature is 60°C. Please keep handspray, showerhead and the
shower arm away from heater, or it may become damaged and cause injury to the user.
HANDLE OPERATION
Lift handle gently. Turn clockwise for hot water, turn counter-clockwise for cold water. Water flows out from spout
when faucet diverter is in the normal position; lift the diverter gently, turn clockwise for handspray; shut off the
faucet, turn counter-clockwise until it stops.
ROUGH-IN DIMENSIONS
128
4
1277164-K2-D
74036K-4
Wall Mount Bath Shower Faucet
74035K-4
Wall Mount Shower Faucet
87
18º
G1/2˝
G1/2˝
171
For Others
49
60
187
74036K-4
TAUT
122
G1/2˝
For BL
G1/2˝
G1/2˝
G1/2˝
G1/2˝
For Others For BL
1