Electrical Requirements - Morphy Richards ADVANCED FINISH SEMI ELECTRONIC IRON Instructions Manual

RN40740MUK Rev3:RN40740 MUK Rev3 20/02/2009 09:20 Page 3
• It is recommended that you use up
one beaker of water by operating
your iron's steam and shot of
steam functions before ironing any
clothes as some dripping may
occur while your iron's steam
system is activated.
ELECTRICAL
REQUIREMENTS
Check that the voltage on the
rating plate of your appliance
corresponds with your house
electricity supply which must be
A.C. (Alternating Current).
INSTRUCTIONS FOR USE
Temperature guide
Heat setting markings on the adjustable control dial of all Morphy Richards irons match those of
the International Textile Care Labelling Code.
Symbol
Do not iron
Control knob
at all
positions
Fabric
Ironing
With water in tank
Without water in tank
For details of other Morphy Richards products, please see our website:
If the socket outlets in your home
are not suitable for the plug
supplied with this appliance, the
plug should be removed and the
appropriate one fitted.
WARNING: The plug removed
from the mains lead, if severed,
must be destroyed, as a plug
with a bared flexible cord is
hazardous if engaged into a live
socket outlet.
Should the fuse in the 13 amp
plug require changing, a 13 amp
BS1362 fuse must be fitted.
WARNING: This appliance must
be earthed.
(120°C Max) Cool (160°C Max) Warm
Nylon, Acetates Wool, Polyester
e.g. Acrilan mixtures e.g.
Courtelle, Orlon Polyester/Cotton
Triacetates, e.g.
Tricel/Polyester
Iron on wrong side,
if moisture required
use damp cloth
(Not Acetate)
Dry and spray
Dry ironing
(210°C Max) Hot 'Max' Setting
Cotton, Linen
Rayon, Rayon
mixtures,
e.g. Rayon/Linen
Fabrics requiring this
setting usually require
steam pressing for heavy
cotton, denim etc.
Steam/spray/shot of steam
Self clean
3