Morphy Richards ADVANCED FINISH SEMI ELECTRONIC IRON Instructions Manual
Morphy Richards ADVANCED FINISH SEMI ELECTRONIC IRON Instructions Manual

Morphy Richards ADVANCED FINISH SEMI ELECTRONIC IRON Instructions Manual

Steam/spray/shot/press

Advertisement

Quick Links

RN40740MUK Rev3:RN40740 MUK Rev3 20/02/2009 09:20 Page 1
'Advanced Finish'
Semi-electronic iron
Please read and keep these instructions
Getting the best from your new iron....
Safety first
Caution must be used when handling this appliance as it does get
very hot. Always switch off the unit and allow to cool before cleaning
or storing.
Self-clean
Your iron will give the best ironing results and will last longer if you
clean the soleplate once a month, see 'Maintenance' on pages 6 & 7.
To improve the life of your new product and to ensure the cleanliness of your
clothes, we strongly recommend the use of distilled or demineralised water.
RN40740 MUK Rev 3
If you have a problem or complaint, please call our dedicated UK based helpline
before returning your product to the retailer from where it was purchased.
UK Helpline: 0844 871 0953
Replacement Parts: 0844 873 0719
Ireland Helpline: 1800 409 119
steam/spray/shot/press
TURBO TIP
CONSTANT
STEAM
PRESS
AND SET

Advertisement

Table of Contents
loading

Summary of Contents for Morphy Richards ADVANCED FINISH SEMI ELECTRONIC IRON

  • Page 1 RN40740MUK Rev3:RN40740 MUK Rev3 20/02/2009 09:20 Page 1 TURBO TIP CONSTANT STEAM PRESS AND SET ‘Advanced Finish’ Semi-electronic iron steam/spray/shot/press Please read and keep these instructions Getting the best from your new iron..Safety first Caution must be used when handling this appliance as it does get very hot.
  • Page 2: Important Safety Instructions

    • The socket should always be disassemble the iron, but off before plugging or telephone Morphy Richards WARNING: Danger to the unplugging from the socket. for advice. Incorrect person! Never yank the cord to...
  • Page 3: Electrical Requirements

    WARNING: This appliance must be earthed. INSTRUCTIONS FOR USE Temperature guide Heat setting markings on the adjustable control dial of all Morphy Richards irons match those of the International Textile Care Labelling Code. Symbol (120°C Max) Cool (160°C Max) Warm (210°C Max) Hot...
  • Page 4: Before Use

    RN40740MUK Rev3:RN40740 MUK Rev3 20/02/2009 09:20 Page 4 ‰ ‹ ¤ ⁄ „ › ‚ The tank fi holds 350ml Ê of water, fill the beaker fl to the 350ml · Â ‡ line. Á Ë COMPONENTS OF YOUR IRON ⁄...
  • Page 5: Temperature Control

    When temperature using the water spray it may be necessary to push the button a few times to get the spray pump primed. ‹ For details of other Morphy Richards products, please see our website:...
  • Page 6: Maintenance

    RN40740MUK Rev3:RN40740 MUK Rev3 20/02/2009 09:20 Page 6 Variable steam Steam off prevent water escaping from the Fill the iron with water as soleplate when the iron is too described in ‘Filling’, page cold. 4, and insert the plug into the electrical socket.
  • Page 7 UK Helpline 0844 871 0953 Do not use scouring Replacement Parts 0844 873 0719 powder or solution as this could cause damage to the Ireland Helpline 1800 409 119 coating. For details of other Morphy Richards products, please see our website:...
  • Page 8 Mexborough, South Yorkshire, Morphy Richards products are intended for household use only. England, S64 8AJ Morphy Richards has a policy of continuous improvement in product quality and Helplines (office hours) design. The company, therefore, reserves the right to change the specification of UK 0844 871 0953 its models at any time.

This manual is also suitable for:

'advanced finish' semi-electronic iron40740

Table of Contents