Oregon Scientific SUPERMAN LERNCOMPUTER DUO Manual page 30

Table of Contents

Advertisement

Available languages

Available languages

Starting the Superman
Laptop Advance
TM
There are two ways to switch the unit on.
1. When the unit is closed, turn on the main switch located at the back of the
unit. Wave your hand at approximately 1 cm over the S-Shield and the lid
will open automatically turning the unit on. If the unit is already open but
the power is off, close and reopen the lid to switch the unit back on.
2. Alternatively, press the Open button to open the lid and press the
button at the top right corner of the keyboard. Remember to turn the unit
OFF when you have finished by pushing the same button or by closing
the lid. Make sure the ON/OFF switch at the rear of the unit is ON.
Please Note:
Avoid placing the unit under table lamps or near electrical devices as the close
range may affect the sensitivity of the product.
When the unit is switched off do not place it near electrical devices or under table lamps as turning these
electrical devices on and off may switch the unit on automatically.
The Keyboard
Your Superman™ Laptop Advance features a full computer keyboard.
Setting Button
Press the
button to adjust the volume or screen contrast on the settings screen.
Press up and down on the directional cursor button to move the highlight
between the volume and the contrast settings.
Press left or right on the directional cursor button to adjust the settings.
Shape Buttons
Use the
buttons in the "Remember shape" and "Shape Sequence" games to submit
your answer.
AUS
EIN
5

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Superman laptop advance

Table of Contents