INTRODUCTION
Thank you for selecting this Oregon Scientific
Weather Station with Temperature / Humidity, Ice Alert
and Radio-Controlled Clock (BAR688HG). This clock
is supplied with a remote sensor (THGN122N) and can
support up to 3 sensors in total (additional sensors sold
separately).
NOTE Please keep this manual handy as you use
your new product. It contains practical step-by-step
instructions, as well as technical specifications and
warnings you should know about.
CLOCK OVERVIEW
FRONT VIEW
BAR688HGA_EN_REV3
TM
Wireless
2
1. SNOOZE
2. Weather Forecast Area
3. Outdoor Temperature Area
4. Indoor Temperature Area
5. Clock / Alarm Area
BACK VIEW
�
�
�
�
�
�
�
1. TEMP / HUMIDITY HI / LO
enable / disable hi or lo temperature / humidity alarm
for channel 1
2.
/
: Increase / decrease setting; activate /
deactivate clock reception signal
3. CHANNEL: Switch remote sensor display
4. HEAT INDEX: Display heat index
5. MODE: Change settings / display
2
2006.3.13, 6:34 PM
�
�
��
� �
��
: Change settings or