SPECIFICATION MODEL USS-ESM00021 APPLICABLE PACKING STEEL STRAPPING STRAPPING WIDTH:1/2" ~ 3/4" APPLICABLE STRAPPING SIZE THICKNESS:0.015" ~ 0.023" SEALING METHOD YIN & YANG BUCKLE MAXIMUM TENSION FORCE RANGE FROM 700 to 850N/㎡ 100000-12000psi...
GENERAL INFORMATION These operating instructions are intended to help familiarization with the strapping tool and the possibilities of its use for the intended purpose. The operating instructions contain important information concerning the safe, proper, and efficient use of the strapping tool. Studying the information will help to avoid danger, reduce repairs and stoppages, and increase the reliability and service life of the strapping tool.
SAFETY INSTRUCTIONS Use for the intended purpose: √ The tool is intended for strapping packages, pallet loads, etc. √ This tool was designed and manufactured for safe handling during the strapping operation. √ The tool only processes steel straps. Possible misuse: Plastic strapping is not suitable for this machine.
OPERATION 1. Feeding the strap Wrap the strap around the package. The strapping end is held tightly with the left hand and pulled firmly towards the operator with the right hand.
Page 7
2. Tensioning the strap Hold the tool with the right hand, grasp the tension lever, and move it back and forth until tension is attained. At the same time, the left hand is placed on the sealing handle.
Page 8
3. Sealing the strap The sealing lever is moved forward using the left hand until it hits the stop. The lever is then moved back to its initial position. When sealing, the right hand absorbs the sealing force by holding the tensitioning handle.
Page 9
4. Releasing the tool After completion of the sealing action, the tool can be released from the seal. By lifting the handle, the strap end can be removed from the package. Contact Feel free to visit our website: www.ussolid.com You can email us at service@ussolid.com...
Need help?
Do you have a question about the USS-ESM00021 and is the answer not in the manual?
Questions and answers