NOVA Mounting. WARRANTY Warranty according to the terms and conditions found on the website www.novamounting.com NOVA is not accountable for the roof’s capability to maintain the introduced forces. Please check the roof’s compatibility with a static engineer.
Page 4
Installation Procedure STEP.1 Remove or slide the tile from the roof girder slightly and place the roof hook onto the wooden rafter (refer to the picture below), Fix the roof hooks using two wooden screws – until the EPDM rubber on screw is compressed flat. Grind tile as required and replace. TX40 round head with self tapping screws ST8-7×80TX40 round head with self tapping screws ST8-7×80...
Page 5
STEP.2 Loosen the M8 bolt, then place the rail on top of the clamp 1.Loosen the NOVA rail clamp loosen 2.Tighten the bolt Recommended Torque 12-14N.M STEP. 3 Joining rails. Slide the internal joiner into one end of the rail, then slide the joining rail...
Page 6
STEP.4 Array layout STEP.5 Installing NOVA panel clamps; When installing the first panel, adjust the position of the solar panel according to the technical drawings, secure the panel on the rails by the panel clamps.
Page 7
Attention:1.Ensure the panel clamps are pushed up against the solar panel. 2.Tighten the bolt slowly, until the panel clamp is in holding position. 3.Then use 12-14N.M torque to tighten the bolt. Recommended Torque 12-14N.M...
Page 8
Attention:Please install panels by row(vertical direction). Attention:Solar panel installation completed. Double check all bolts are tightened.
Page 9
Figure Part Name NOVA HD Rail Joiner NOVA FLEXFIT Tile Hook Article # 920-122820 920-122110 Figure Part Name NOVA Click End Clamp 30- NOVA Click Mid Clamp 30- 40mm 35mm Article # 930-991420 930-991410 Figure Regina Wautersweg 13, 8800 Roeselare...
Need help?
Do you have a question about the 920-122110 and is the answer not in the manual?
Questions and answers