Table of Contents
Advertisement
Indicating a turn briefly
Press and hold the lever as far as the pressure
point for as long as you wish to indicate a turn.
Triple turn signal
Press the lever as far as the pressure point; the
flashing turn indicator flashes three times.
You can activate or deactivate this function.
iDrive concept, see page 14.
1.
Call up the start menu.
2.
Press the controller to call up the menu.
3.
Select "Vehicle settings" and press the
controller.
4.
Select "Light" and press the controller.
5.
Select "Triple turn signal activation" and
press the controller.
The triple turn signal function is
switched on.
Wiper system
1
Switching on wipers
2
Switching off wipers or flick-wipe
3
Activating/deactivating the rain sensor
4
Cleaning windscreen and headlights
Online Edition for Part-No. 01 41 0 159 725 © 09/05 BMW AG
5
Adjusting rain sensor sensitivity
Switching on wipers
The lever returns to the home position when
released.
Normal wiper speed
Press once.
The wipers switch to intermittent wipe as the
car comes to a halt.
Fast wiper speed
Press twice or press beyond the pressure point.
The wipers switch to normal speed as the car
comes to a halt.
Rain sensor
The speed of the wipers is regulated automati-
cally according to how hard it is raining. The rain
sensor is located on the windscreen, directly in
front of the inside mirror.
Activating the rain sensor
Press the button, arrow 3. The LED in the but-
ton comes on.
Adjusting rain sensor sensitivity
Turn the knurled wheel 5.
Deactivating the rain sensor
Press the button again, arrow 3. The LED goes
out.
Deactivate the rain sensor in an automatic
car wash, to prevent the car's wipers
being activated inadvertently and
damaged.<
63
Hide quick links:
Advertisement
Table of Contents
