Controls
Turn signals/
headlamp flasher
1
High beams
2
Headlamp flasher
3
Turn signal
Using turn signals
Press the lever beyond the resistance point.
To turn off manually, press the lever to the
resistance point.
Unusually rapid flashing of the indicator
lamp and the turn signals indicates that
one of the turn signal bulbs has
Signaling a turn briefly
Press the lever as far as the resistance point for
as long as you wish to signal a turn.
Triple turn signal activation
Press the lever as far as the resistance point.
The turn signals flash three times.
You can activate or deactivate this function.
1.
Switch on the ignition, refer to page 54.
2.
Briefly press button 1 in the turn signal/high
beam lever up or down repeatedly until the
symbol appears in the display, accompa-
nied by the word "SET".
64
Driving
failed.<
Online Edition for Part no. 01402911200 - © 06/13 BMW AG
3.
Press button 2.
4.
Briefly press button 1 in the turn indicator
lever down repeatedly until the symbol
appears in the display.
5.
Press button 2.
6.
Use button 1 to select:
>
Turn signals flash once.
>
Triple turn signal.
7.
Press button 2.
The setting is stored for the remote control
currently in use.
Wiper system
Do not switch on the wipers if they immo-
bilized by ice; otherwise, damage to the
wiper blades and wiper motor may
Do not use the wipers when the window
glass is dry; otherwise, the wiper blades
may experience accelerated wear or
occur.<
damage.<