EDIFIER LolliClip Manual

Open-ear True Wireless Noise Cancelling Earbuds
EN 1. Power ON/OFF
2. First pairing
1. Once powered on, the earbuds will automatically enter Bluetooth
pairing mode.
2. Select "EDIFIER LolliClip" from your device list to connect.
3. Pairing for new device
1. Place the earbuds in the case and keep it open.
2. Press and hold the button on the case for 3s until white and
orange LED blink.
Note: For subsequent use, the earbuds will automatically connect
to the device used last time.
4. Reset
1. Place the earbuds in the case and keep it open.
2. Press the button on the case 3 times, white LED will blink until the
reset is complete.
5. Multipoint connection
①
②
③
1. Pair device A with the earbuds manually and keep the earbuds in
the case.
2. Re-enter Bluetooth pairing and select "EDIFIER LolliClip" in device
B settings to connect.
3. Select "EDIFIER LolliClip" again in device A settings to complete
the multipoint connection.
Note: For subsequent use, the earbuds will automatically reconnect
to the two devices used last time.
6. Controls
Note:
1. "x2" double tap; "x3" triple tap;
2. Download EDIFIER ConneX App for more customizable control
settings.
7. Charging
Input: 5V 200mA(Earbuds)
enabled in the app.
Note: This product is not a medical device. The data provided is
for reference only and cannot be used for clinical diagnosis or
treatment.
LolliClip
Manual
Bluetooth
EDIFIER LolliClip
A
L
x2
x2
x2
x3
Bluetooth
EDIFIER LolliClip
3s
x3
3s
R
x2
x2
x2
x3
5V 1A(Charging case)
Bluetooth
EDIFIER LolliClip
Bluetooth
EDIFIER LolliClip
A
B