Advertisement
Quick Links
Bluetooth Active Noise Cancelling Stereo Headphones
Before using the headphone, please carefully read this user manual and keep securely for further reference.
■ Features:
High fidelity Bluetooth V4.1 headphone with Qualcomm® aptX™ audio decoding
●
Active Noise Cancelling (ANC) technology best for car/bus/train/aircraft environments
●
Up to 12 hours of playback and 540 hours of standby
●
Multi-function buttons easily control calls, music, and volume
●
Soft around-ear earcups to comfortably enjoy music
●
Stylish carrying case with AUX audio & USB charging cable.
●
---------------------------------------------------------------------------------------------------------------
■ Specifications:
Bluetooth version: Bluetooth V4.1
Bluetooth profiles: HFP, HSP, A2DP, AVRCP
Effective distance: 10m
Playback time: up to 12 hours
Standby time: up to 540 hours
Input: 5.0V==500mA
Charging time: 3 hours
Driver unit: ф40mm
Impedance: 32Ω
Frequency response: 20Hz-20KHz
Sensitivity: 110±3dB
W845NB
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for EDIFIER W845NB
Summary of Contents for EDIFIER W845NB
-
Page 1: Specifications
W845NB Bluetooth Active Noise Cancelling Stereo Headphones Before using the headphone, please carefully read this user manual and keep securely for further reference. ■ Features: High fidelity Bluetooth V4.1 headphone with Qualcomm® aptX™ audio decoding ● Active Noise Cancelling (ANC) technology best for car/bus/train/aircraft environments ●... - Page 2 ■ Operation instructions 1. Illustrations 1. Multifunction key 2. Indicator 3. Volume up 4. Volume down 5. USB connector 6. Call microphone 7. Audio cable connector 8. ANC microphone 9. ANC indicator 10. ANC switch 11. ANC microphone Box content: Headphone *1PCS Storage bag *1PCS User manual *1PCS...
-
Page 3: Power On/Off
1.5 seconds) until the red and blue indicator blinks alternately and rapidly. Keep the headphone and Bluetooth phone within one meter, the closer the better; ● Set Bluetooth phone to search for and pair with “EDIFIER W845NB”; The blue indicator blinks slowly, then the connecting is successful. ● Note: Pin code for connection is “0000”... - Page 4 • Meanwhile press and hold volume up & volume down keys twice, and start multi-point connection function when hearing a prompt tone. • Operate the first phone to select “EDIFIER W845NB”, and then it completes to connect two Bluetooth devices simultaneously.
- Page 5 3.2 Make three way call Function Headphone status Operation End the current call to answer Talking, Press the multifunction key the new incoming call There is the second incoming call Remain the current call to Talking, Press the multifunction key twice answer the new incoming call There is the second incoming call Call switching...
- Page 6 5. ANC (Active Noise Canceling) 5.1 ANC function can be used with Bluetooth. 5.2 ANC function can also be used with AUX when the headphone is powered. 6. Charging and battery level display W845NB supports battery level display for iPhone as shown below:...
- Page 7 Fully charged Low battery level When used, if only red indicator blinks and with a prompt tone per 5 minutes, it indicates the headphone is in low battery level and please use it after fully charged. Red light steady lit = charging Blue light steady lit = fully charged Charging time: about 3 hours for a full charging 7.
- Page 8 ■ Maintenance When using, please read the following advices carefully to help you comply with warranty terms and extend the product’s service life. ● avoid affecting internal circuit Keep the product dry; do not place in humid places to Do not use the product during intense exercise or with much sweat to prevent sweat from dropping into the product to damage it.
- Page 9 ■ FAQs 1. Red light instead of blue light flashes. Answer: It means the headphone is in low battery level, please recharge the headphone. 2. Red light is off during charging. Answer: a. Please ensure the charging device is correctly connected with the headphone. b.
- Page 10 CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. A warning that batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. ---------------------------------------------------------------------------------------------------------------- 1.
- Page 11 FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Page 12 (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectrique subi, mêmesi le brouillage est susceptible d'en compromettre le fonctionnement.
Need help?
Do you have a question about the W845NB and is the answer not in the manual?
Questions and answers