EDIFIER X6 - Bluetooth Water and Dust Resistant Earbuds Manual

EDIFIER X6 - Bluetooth Water and Dust Resistant Earbuds Manual

Also See for Xemal X6:

Advertisement

EDIFIER X6 - Bluetooth Water and Dust Resistant Earbuds Manual

Power on when taken out of the charging case


Power on

Power off when the charging case is closed.

Power off

Pairing

Pairing Step 1Pairing Step 2

  • Place the earbuds in the case, press and hold the pairing button for around 3 seconds to enter Bluetooth pairing.
  • Place the earbuds in the case, press and hold the pairing button for around 8 seconds to enter TWS pairing of the left and right earbuds.
  • Place the earbuds in the case, press and hold the pairing button for around 12 seconds to clear pairing records.
  • Bluetooth pairing: red and blue lights flash rapidly. After pairing is successful: blue light flashes twice in 5 seconds.
  • TWS pairing of the left and right earbuds: blue light flashes rapidly.
  • Clear pairing records: red light flashes rapidly for 6 times


Pairing Step 3Pairing Step 4

  • For initial use, directly take the earbuds out of the charging case, and set mobile phone to search for and connect to the corresponding Bluetooth pairing name as shown in the above picture; For subsequent use, the earbuds will automatically connect to the mobile phone connected last time.
  • Tips: After pairing your mobile phone with one earbud, you can repeat the above steps to pair the mobile phone with the other earbud, then you can choose to use either of earbuds.

Functional operation (same operation for the left and right earbuds)

Functional operation

Accept/end a call:
double click the left or right earbud
Pause/play:
double click the left or right earbud
Voice assistant:
triple click the left or right earbud

NOTE: Images are for illustrative purposes only and may differ from the actual product.


The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by EDIFIER is under license. Other trademarks and trade names are those of their respective owners.

Declaration for EU
Frequency Band: 2.402GHz ~ 2.480GHz
RF Power Output: ≤20 dBm (EIRP)
There is no restriction of use.

Input: 5V 100mA (Earbuds)
5V 500mA (Charging case)
Model: EDF200021


Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries.
aptX is a trademark of Qualcomm TechnologiesInternational, Ltd.,
registered in the United States and other countries.

NOTICE:
For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice.
Products of EDIFIER will be customized for different applications.
Pictures and illustrations shown on this manual may be slightly different from actual product. If any difference is found, the actual product prevails.

Edifier International Limited
P.O. Box 6264
General Post Office
Hong Kong
www.edifier.com
© 2021 Edifier International Limited. All rights reserved.
Printed in China


@Edifierglobal


@Edifier_Global


@Edifier_Global

Videos

Edifier X6 - Unboxing & Review Video

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download EDIFIER X6 - Bluetooth Water and Dust Resistant Earbuds Manual

Advertisement

Need help?

Need help?

Do you have a question about the Xemal X6 and is the answer not in the manual?

Questions and answers

Table of Contents