Bally ALPHA Quick Start Manual

BEFORE BEGINNING, MAKE A NOTE OF THE MODEL OF YOUR PRINTER ( IF APPLICABLE )
& YOUR BILL VALIDATOR ( IF APPLICABLE )
*REQUIRED ALPHA SETTINGS FOLLOWING A CLEAR OR A GAME CHANGE*
TO BEGIN, PUSH THE WHITE BUTTON ON THE FRONT OF YOUR MPU TO ENTER YOUR ALPHA
SETTINGS MENU.
YOU WILL NOTICE IN THE TOP RIGHT CORNER OF THE SCREEN IS A LIST OF THINGS THAT
NEED TO BE SET BEFORE YOUR SLOT MACHINE WILL BE READY TO RUN.
LISTED BELOW ARE THE SETTINGS YOU MUST ENTER BEFORE YOUR MACHINE WILL BE
READY TO RUN....
ALL OF THE ORANGE BUTTONS IN THE SECOND COLUMN OF BUTTONS ARE THINGS THAT
NEED TO BE SET IN ORDER FOR YOUR SLOT MACHINE TO RUN PROPERLY!
OK, LET'S GET STARTED!!!!
1. CLOCK SETUP –
a. PUSH THE CLOCK SETUP BUTTON AND ENTER THE CORRECT TIME DAY AND
DATE, WHEN YOU'RE FINISHED, CLICK SET.
2. TOUCH SCREEN SETUP –
a. PUSH THE TOUCHSCREEN BUTTON. TURN THE RESET KEY ON THE RIGHT SIDE OF
YOUR SLOT MACHINE AND FOLLOW THE DIRECTIONS ON THE SCREEN.
3. MACHINE SETUP then DEVICE SETUP –
a. DEVICE CONFIG - TOUCH AND SELECT DEVICES APPLICABLE TO YOU SLOT
b. SELECT DECK STYLE
c. SAVE AND EXIT—
**Note: These settings are not changeable after a SAVE is make unless you do a RAM CLEAR
4. MACHINE SETUP then MACHINE INFO
a. ENTER SERIAL NUMBER AND ASSEST NUMBER
**Note: These settings are not changeable after a SAVE is make unless you do a RAM CLEAR
BALLY ALPHA REQUIRED SETTINGS
AFTER A CLEAR IS PERFORMED
( NO TITO INSTALLED )
Sequence of Setup from Alpha Menu