1. Manuals
  2. Brands
  3. SWP Manuals
  4. Welding System
  5. Stealth DIGI-ARC 205LT
  6. Operator's manual

SWP Stealth DIGI-ARC 205LT Operator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATORS' MANUAL
DIGI-ARC 205LT
Part No. 9023H
IMPORTANT
Please read these instructions carefully before attempting to use this equipment.
Retain this manual and keep it to hand for quick reference. Pay particular attention to the safety instructions.
Contact your distributor if you do not fully understand this manual.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Stealth DIGI-ARC 205LT and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for SWP Stealth DIGI-ARC 205LT

Summary of Contents for SWP Stealth DIGI-ARC 205LT

  • Page 1 OPERATORS’ MANUAL DIGI-ARC 205LT Part No. 9023H IMPORTANT Please read these instructions carefully before attempting to use this equipment. Retain this manual and keep it to hand for quick reference. Pay particular attention to the safety instructions. Contact your distributor if you do not fully understand this manual.
  • Page 2 STEALTH DIGI-ARC 205LT...

  • Page 3: Table Of Contents

    STEALTH DIGI-ARC 205LT CONTENTS SAFETY SUMMARY MAIN ELECTRICAL DIAGRAM TECHNICAL INFORMATION OPERATION CONTROL AND CONNECTORS INSTALLATION & ADJUSTMENT 6.1 INSTALLATION 6.2 OPERATION 6.3 WELDING TABLE OPERATION NOTICES 7.1 INSTALLATION 7.2 SAFETY MAINTENANCE TROUBLESHOOTING AND SERVICE 10 PARTS LIST...

  • Page 4: Safety

    1. SAFETY STEALTH DIGI-ARC 25LT 1. SAFETY 1. SAFETY 1. SAFETY 1. SAFETY Welding may damage your body or others, so please take protection measure in SAFETY 1. SAFETY Welding may damage your body or others, so please take protection measure in operation.

  • Page 5: Summary

    Thus, it is characterized with portable, small size, light weight, low consumption and noise etc. Bluweld S series(discrete) has excellent performance: constant current STEALTH DIGI-ARC 205LT output makes welding arc more stable; fast dynamic response speed reduces the SUMMARY impact form the arc length fluctuation to the current.

  • Page 6: Technical Information

    STEALTH DIGI-ARC 205LT TECHNICAL INFORMATION DIGI-ARC 205LT Power Supply Voltage (V) 1~230±10% Frequency (Hz) 50/60 Rated Input Power (Kw) 6.8 MMA / 4.5 TIG Rate Input Current (A) 47 MMA / 32 TIG 60% 200A Duty cycle (40ºC / 10 min)

  • Page 7: Operation Control And Connectors

    STEALTH DIGI-ARC 205LT OPERATION CONTROL AND CONNECTORS Positive output 35-50. 6. Installation & Adjustment Negative output 35-50. Note: Please follow steps in strictly accordance with installation! Welding current adjustment knob: turn to adjust the output current size. Electrical connection operation must be shut after power distribution box Power indicator: power-on light.

  • Page 8: Installation & Adjustment

    STEALTH DIGI-ARC 205LT INSTALLATION & ADJUSTMENT Note: Please follow steps in strict accordance with installation instructions! Electrical connection must be disconnected after power is switched off! Equipment protection level is IP23. Do not use in the rain! Installation 6.1.1 Each machine is fitted with a power cable based on the input voltage connected to the appropriate selection.

  • Page 9: Welding Table

    STEALTH DIGI-ARC 205LT Welding Table Note: The following table applies to low-carbon steel. For other materials, please refer to related information. Electrode diameter Recommended welding Recommended welding (mm) current (A) voltage (V) 20~60 20.8~22.4 44~84 21.76~23.36 60~100 22.4~24 80~120 23.2~24.8 108~148 23.32~24.92...

  • Page 10: Maintenance

    STEALTH DIGI-ARC 200LT 7.2.3 Prevent over-voltage The welding voltage within the circuit will automatically compensate to ensure the welding current is in the permitted range. If the voltage exceeds the allowable value it can damage the machine. The welder should be fully aware of this and take appropriate preventive measures.

  • Page 11: Troubleshooting And Service

    STEALTH DIGI-ARC 205LT TROUBLESHOOTING AND SERVICE Common faults and solutions: Symptom Solution Power indicator does not light, fan does not – Make sure the power switch is turned on. turn, no welding output – Confirm that the power input cable is connected to electricity.
  • Page 12 STEALTH DIGI-ARC 205LT...

  • Page 13: Parts List

    STEALTH DIGI-ARC 205LT 10 PARTS LIST 9023H-02 COVER 9023H-03 REAR PANEL – USE 9020H-07 9023H-08 FAN 9023H-14 BASE PANEL 9023H-17 FRONT PANEL – USE 9021H-15 9023H-20 KNOB – USE 9000H-33 9023H-21 FRONT PCB 9023H-22 MAIN CONTROL PCB 9023H-27 RECTIFIER 9023H-30 MAIN PCB ASSEMBLY...
  • Page 14 STEALTH DIGI-ARC 205LT...
  • Page 15 STEALTH DIGI-ARC 205LT...
  • Page 16 STEALTH DIGI-ARC 205LT Specialised Welding Products Ltd Unit 1, Farringdon Industrial Centre, Farringdon, Nr Alton, Hampshire GU34 3DD, UK tel: +44 (0)1420 588180 • fax: +44 (0)1420 588184 • email: sales@swp.uk.net...

This manual is also suitable for:

9023h

Table of Contents