This document is just an abridged version. The full version of this manual can be found at https://www.sencor.cz/dvb-t2-prijimac/sdb-5007t. This document contains important information that will help you learn how to correctly use this set-top box and its accessories to your satisfaction.
Remote control RED/GREEN/YELLOW/Blue button (For interactive functions / Nested menu function buttons) EPG (Electronic Programme Guide) (Open the Electronic Programme Guide menu) OK button (Confirmation of selection in the offer) Cursor / CH+,- (Previous/Next Channel) / VOL+,- (Volume Up/ Down) (Cursor: Navigation buttons to browse menu items) (CH+/-: Previous/Next channel)
Programmable button learning mode To enter the learning mode, press the “SET” button in the TV CONTROL area for 3 seconds (until the LED lights up intensely). Press the blue “POWER” button of the learning remote control (the LED will flash slowly).
System connection General information There are many different types of TVs and other devices that can be connected to this STB. This guide lists the most common ways to connect your devices. Connecting a TV Antenna Scart cable RF cable HDMI cable Television Note: Please connect the HDMI cable to the receiver ONLY when turned off (red Standby...
Page 7
Electronic Programme Guide (EPG) Press the "EPG" button to open the EPG (Electronic Programme Guide) menu. Press the cursor buttons to toggle between the channel list, the selected channel's event schedule. Press the “LEFT/RIGHT” button to switch between channel and programme windows. Only in the channel window: Press OK to view information about the current programme.
Page 8
FAST ČR, a.s. hereby declares that the radio device type SDB 5007T conforms to the 2014/53/EU directive. For full version of the EU declaration of conformity, please refer to www.sencor.eu website...
FAST ČR, a.s., U Sanitasu 1621, Říčany 251 01, Czech Republic info@sencor.com Authorized service centers: Visit www.sencor.com for detailed information about authorized service centers. The original version of the instructions is in the Czech language, other language versions are made by the appropriate translation.
Need help?
Do you have a question about the SDB 5007T and is the answer not in the manual?
Questions and answers