Bedfont CELLER8 Quick Start Manual

Please read the manual before first use to check any
warnings or contraindications.
Please charge the
CELLER8
first use.
Turning the CELLER8
To turn the CELLER8
press down on the Control
Dial for 2 seconds.
The CELLER8 will switch off automatically if idle for 60 seconds or at the end of a program.
®
Connecting the Celler8
If using a CELLER8
®
controller.
1
Setting up an application and program
Select an application using the control dial. Turn the control
dial clockwise and anti-clockwise to navigate up and down
on the menu. Press down on the Control Dial to select the
application.
Applications:
Controller
Only the CELLER8
emit PEMFs in this mode.
Quick Start Guide
fully before
®
on
®
on,
®
controller with the mat
®
mat, connect it now, by plugging it into the bottom of the CELLER8
1. Charging port
2
2. Mat port
will Only the CELLER8
®
will emit PEMFs in this
Mat
Mat The CELLER8
®
emit PEMFs at the same
mode. time.
Turning the CELLER8
To turn the CELLER8
press down on the Control
Dial for 3 seconds.
Mat & Controller
& Mat will
®
off
®
off
®
®