Bulbs for flashing turn
indicators, rear
RY10W / 12 V / 10 W
with LED turn indicators
LED / 12 V
Turn bulb 2 clockwise to install
it in the bulb housing.
OA
Working from the inboard side,
insert the glass into the bulb
housing and close the housing.
Install screw 1.
Replacing number-plate
light bulbs
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Remove screw 1 from the
mudguard cover and remove
the cover.
8
109
z