BMW F 650 GS Rider's Manual page 112

Replacing brake light and
8
rear light bulb
The LED rear light can be re-
108
placed only as a complete unit.
Consult a specialist workshop,
preferably an authorised BMW
Motorrad dealer.
Replacing turn indicator
bulbs, front and rear
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
z
Switch off the ignition.
Remove screw 1.
Pull the glass out of the reflect-
or housing at the threaded-
fastener side.
Turn bulb 2 counter-clockwise
and remove it from the bulb
housing.
Replace the defective bulb.
Do not touch the glass of
new bulbs with your fingers.
Use a clean, dry cloth to hold
the bulbs when handling them.
Dirt deposits, in particular oil and
grease, interfere with heat radi-
ation from the bulb. This leads
to overheating and shortens the
bulb's operating life.
Bulbs for flashing turn
indicators, front
R10W / 12 V / 10 W
with white turn indicators
RY10W / 12 V / 10 W
with LED turn indicators
LED / 12 V
Bulbs for flashing turn
indicators, rear
R10W / 12 V / 10 W
with white turn indicators
OE
OA
OE