Godox X nano C User Manual
Godox X nano C User Manual

Godox X nano C User Manual

Ttl wireless flash trigger

Advertisement

Quick Links

Important Safety Instructions
This product is a professional photographic equipment, to be operated by professional
personnel only.
The following basic safety precautions must be followed when using this product:
All transport protective materials and packaging on the product must be removed before use.
1.
Carefully read and fully understand the instruction manual before use and strictly
follow the safety instructions.
Dot not use damaged equipment or accessories. Allow professional repair
2.
technicians to inspect and confirm normal operation before continuing use after
repairs.
3.
Please disconnect the power when not in use.
4.
This device is not waterproof. Keep it dry and avoid immersing it in water or other
liquids. It should be installed in a ventilated and dry location and avoid using in rainy,
humid, dusty, or overheated environments. Do not place items above the device or
allow liquids to flow into it to prevent danger.
5.
Do not disassemble without authorization. If the product malfunctions, it must be
inspected and repaired by our company or authorized repair personnel.
6.
Do not place the device near alcohol, gasoline, or other flammable volatile solvents or
gases such as methane and ethane.
Do not use or store this device in potentially explosive environments.
7.
8.
Clean gently with a dry cloth. Do not use a wet cloth as it may damage the device.
This instruction manual is based on rigorous testing. Changes in design and
9.
specifications are subject to change without notice. Check official website for latest
instruction manual and product updates.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the X nano C and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Godox X nano C

  • Page 1 Important Safety Instructions This product is a professional photographic equipment, to be operated by professional personnel only. The following basic safety precautions must be followed when using this product: All transport protective materials and packaging on the product must be removed before use. Carefully read and fully understand the instruction manual before use and strictly follow the safety instructions.
  • Page 2: Table Of Contents

    Compatible Camera Models Power Switch Technical Data Channel Setting Firmware Upgrade ID Setting Attentions Scanning Spare Channel Settings The Reason & Solution of Not Triggering in ZOOM Setting Godox 2.4G Wireless Sync Setting Caring for Flash Trigger Shooting Mode Setting...
  • Page 3: Warning

    Thank you for purchasing! Body TTL wireless flash trigger X nano C, comes with a compact size and a weight of 48g, supports E-TTL II flash and HSS, up to 1/8000s flash sync speed. It´s not only compatible with cameras with Canon hot shoes, but also can control camera flashes, outdoor flashes, studio flashes and retro flashes who have equipped with Godox 2.4GHz wireless X systems.
  • Page 4 Display Panel CH12 CH12 2 3 4 5 6 1. Channel (32) 2. Camera Connection CH12 3. < > means high speed sync < > means rear curtain sync < > means front curtain sync 4. Modeling Lamp Master Control 5.
  • Page 5: What's Inside

    2. Slide the screen of X nano C down from the top to display <Setting>, press <Setting> to enter C.Fn. menu, then press <Wireless> to set CH and ID. Slide the screen from the left to the right to return to the main interface, on which you can set the flash mode and output power level of groups.
  • Page 6: As A Wireless Studio Flash Trigger

    As a Wireless Studio Flash Trigger 2. Slide the screen of X nano C down from the top to display <Setting>, press <Setting> to enter C.Fn. menu, then press <Wireless> to set CH and ID. Slide the screen from the left to...
  • Page 7: As A Flash Trigger With 2.5Mm Sync

    C.Fn. menu. 2. Slide the screen of X nano C down from the top to display <Setting>, press <Setting> to enter C.Fn. menu, then press <Wireless> to set CH and ID. Slide the screen from the left to 2.
  • Page 8: Scanning Spare Channel Settings

    Scanning Spare Channel Settings Sync Setting Scanning spare channel function is useful to avoid 1. In main interface, slide the screen down from the interference from others' using the same channel. top to display <Setting>, press <Setting> to enter C.Fn. menu. Or you can press the <M/ >...
  • Page 9: Group Setting

    One-shoot Mode: In the M and Multi mode, the 2. Multi-group Display CH12 lead unit only sends triggering signals to the follow The main interface will display multi-group parameters unit, which is suitable for one person photography after group selection, you can check output power of for the advantage of power saving.
  • Page 10: Output Value Settings (Power Settings)

    Output Value Settings (Power Settings) Flash Exposure Compensation Setting Multi-group display in M mode Multi-group display in TTL mode Press <+> to increase output power levels of multi-group CH12 Press <+> to increase FEC values of multi-group at the CH12 at the same time, press <->...
  • Page 11: Multi Flash Setting

    Modeling Lamp Setting Multi Flash Setting (Output Value, Times and Frequency) 1. When displaying multiple groups, slide the screen CH12 In main interface, slide the screen down from the CH12 down from the top to display < >, press it to top to display <Multi>, press it to enter multi flash control the ON/OFF of the modeling lamp.
  • Page 12: Buzz Setting

    Buzz Setting Locking Function CH12 CH12 +0.3 In main interface, slide the screen down from the top In main interface, slide the screen down from the top to display < >, or you can press <M/ > button to display < >, or you can press <M/ >...
  • Page 13 0.1: 0.1 step increment Cancel Back to previous interface turn off TCM transform function Note: Transform the Model: X nano C Device model is X nano C Device Info TT685II/V860III series TTL shooting value into the output Firmware: V0.64 The current firmware version is V0.64, the upgraded version (if...
  • Page 14: Compatible Flash Models

    Can only be triggered Smart flash series Note: The range of support functions: the functions that are both owned by X nano C and flash. Compatible Camera Models This flash trigger can be used on the following Canon EOS series camera models:...
  • Page 15: Technical Data

    Built-in Lithium Battery 3.7V 850mAh As the firmware upgrade needs the support of Godox G3 software, please download and Charging Time ≈1h 30min install the "Godox G3 firmware upgrade software" before upgrading. Then, choose the related Working Time ≈3h...
  • Page 16: Caring For Flash Trigger

    Maximum EIRP Power: 5dBm Declaration of Conformity: GODox Photo Equipment Co.Ltd.hereby declares that this equipment are incompliance with the essential requirements and other relevant provisions of Directive2014/53/EU. ln accordance with Article 10(2) and Article 10(10), this product is allowed to beused in all EU member states.For more information of DoC, Please click this weblink:...
  • Page 17: Fcc Statement

    FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 18: Warranty

    If maintenance service is needed, you can directly contact the product distributor or authorized service maintenance service, please fill in the following form in coordination with the seller and institutions. You can also contact the Godox after-sale service call and we will offer you service. When safe-keep it. Thank you! applying for maintenance service, you should provide valid warranty card.
  • Page 19 Customer sends the Parts Battery product to designated site Customer sends the Electrical parts e.g.battery product to charger, etc. designated site Flash tube, power cord, sync Other Without warranty cable,modeling lamp,lamp body, lamp Items cover,lockingdevice, package, etc. Godox After-sale Service Call +86-755-29609320(8062)

Table of Contents