Table of Contents
Advertisement
深圳市神牛摄影器材有限公司
GODOX Photo Equipment Co., Ltd.
地址/Add: 深圳市宝安区福海街道塘尾社区耀川工业区厂房2栋1层至4层、4栋1层至4层
1st to 4th Floor, Building 2/ 1st to 4th Floor, Building 4, Yaochuan Industrial Zone, Tangwei
Community, Fuhai Street, Bao'an District, Shenzhen 518103, China
电话/Tel: +86-755-29609320(8062)
传真/Fax: +86-755-25723423
邮箱/E-mail: godox@godox.com
705-X2TC00-00
Made In China
TTL
TTL Wireless Flash Trigger
Instruction Manual
说
明
手
册
无线引闪器
Advertisement
Table of Contents
Related Manuals for Godox X2TC
Summary of Contents for Godox X2TC
- Page 1 无线引闪器 TTL Wireless Flash Trigger 深圳市神牛摄影器材有限公司 GODOX Photo Equipment Co., Ltd. 地址/Add: 深圳市宝安区福海街道塘尾社区耀川工业区厂房2栋1层至4层、4栋1层至4层 1st to 4th Floor, Building 2/ 1st to 4th Floor, Building 4, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an District, Shenzhen 518103, China 电话/Tel: +86-755-29609320(8062) 传真/Fax: +86-755-25723423 邮箱/E-mail: godox@godox.com...
-
Page 2: Table Of Contents
Thanks for your purchase of this X2T-C wireless flash trigger. Foreword Sync Socket Settings This wireless flash trigger is suitable for using Canon cameras to control Godox Warning SHOOT Function Settings flashes with X system e.g. camera flash, outdoor flash, and studio flash. It can also Names of Parts C.Fn: Setting Custom Functions... -
Page 3: Warning
Warning Names of Parts Body Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center. Hot Shoe Speedlite Connection Always keep this product dry. Do not use in rain or in damp conditions. AF Assist Beam Switch Keep out of reach of children. -
Page 4: Lcd Panel
Battery Names of Parts AA alkaline batteries are recommended. LCD Panel Installing Batteries As shown in the illustration, slide the battery compartment lid of the flash trigger and insert two V0.2 /128 CH 01 SYNC AA batteries separately. BLUE.T. Battery Indication BEEP Check the battery level indication on the LCD panel ZOOM... -
Page 5: Setting The Flash Trigger
Setting the Flash Trigger Setting the Flash Trigger Power Switch Wireless ID Settings Slide the Power Switch to ON, and the device is on and status indicator lamp will not Change the wireless channels and wireless ID to avoid interference for it can only be reveal. -
Page 6: Output Value Settings
For most of camera flashes, the minimum output value is 1/128 and cannot be set to 1/256. However, change the setting value. the value can change to 1/256 when using in combination with Godox strong power flashes e.g. AD600, etc. -
Page 7: Modeling Lamp Settings
Setting the Flash Trigger Setting the Flash Trigger Modeling Lamp Settings Buzz Settings 1. Long press the <MENU> button for 2 seconds to Press the <MENU> button to enter C.Fn BEEP and V0.2 SYNC control the ON/OFF of the modeling lamp. press the <SET>... -
Page 8: Shoot Function Settings
Setting the Flash Trigger Setting the Flash Trigger SHOOT Function Settings C.Fn: Setting Custom Functions The following table lists the available and unavailable custom functions of this flash. Press the <MENU> button to enter C.Fn SHOOT. V0.2 DELAY Press the <SET> button to choose one-shoot or multi- Custom Function Function Setting Signs... -
Page 9: Using The Flash Trigger
Setting the Flash Trigger Using the Flash Trigger 1.2 Short press the <MENU> button to set channel, Custom Function Function Setting Signs Settings and Description Zoom STEP Power output 1/128(0.3) The minimum output is 1/128(change in 0.3 step) group, mode and parameters (refers to the value 1/256(0.3) The minimum output is 1/256(change in 0.3 step) -
Page 10: As A Wireless Original Flash Trigger
Using the Flash Trigger Using the Flash Trigger <GR/CH> button to set the same channel to the flash trigger, and short press 4. As a Wireless Studio Flash Trigger Take GS400II as an example: the < GR/CH> button to set the same group to the flash trigger (Note: please 4.1 Turn off the camera and mount the transmitter refer to the relevant instruction manual when setting the oudoor flashes of other on camera hotshoe. -
Page 11: As A Wireless Shutter Release Trigger
BLUE.T. will displayed under the ON. press the <TEST> button to shoot. Release BEEP 7.2 Search“Godox Photo”in iPhone’s APP Store the button until the status lamp turns to red. ZOOM GDBH A7BC and download the APP. Or install the APP by scanning the QR Code with your smartphone. -
Page 12: Compatible Smartphone Models
Compatible Smartphone Models Using the Flash Trigger This flash trigger can be used on the following Smartphone models: 7.5 Full match and back to APP main interface. iPhone 6S iPhone 6S Plus iPhone 7 Plus iPhone 7 iPhone 8 Plus 7.6 When started the Bluetooth function, the Bluetooth icon will be displayed on the iPhone 8... -
Page 13: Compatible Flash Models
(Display Screen) Canon speedlites, we do not test one by one. XTR-16 AD360/AR400 The flashes with Godox wireless USB port Compatible Camera Models Quicker series/SK series/DP series/ Can only be triggered This flash trigger can be used on the following Canon EOS series camera models:... -
Page 14: Technical Data
USB socket, please use Type-C USB connection line. Memory function Settings will be stored 2 seconds after last operation and recover As the firmware upgrade needs the support of Godox G3 software, please after a restart download and install the "Godox G3 firmware upgrade software" before upgrading. -
Page 15: Attentions
Operating distance limited or flash missing. Check if batteries are exhausted. If so, change them. The Reason & Solution of Not Triggering in Godox 2.4G Wireless Disturbed by the 2.4G signal in outer environment (e.g. wireless base Caring for Flash Trigger station, 2.4G wifi router, Bluetooth, etc.) - Page 16 FCC Statement A. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the X2TC and is the answer not in the manual?
Questions and answers