Table of Contents
Advertisement
深圳市神牛摄影器材有限公司
GODOX Photo Equipment Co., Ltd.
地址/Add: 深圳市宝安区福永镇福洲大道西新和村华发工业园A4栋
Building A4, Xinhe Huafa Industrial Zone, Fuzhou RD West, Fuyong
Town, Baoan District, Shenzhen 518103, China
电话/Tel: +86-755-29609320(8062)
传真/Fax: +86-755-25723423
邮箱/E-mail: godox@godox.com
705-X1C000-00
Made In China
TTL
无线引闪器
TTL Wireless Flash Trigger
For Canon
Instruction Manual
说
明
手
册
Chinese English Bilingual
中英文双语
Advertisement
Table of Contents
Related Manuals for Godox X1R-N
Summary of Contents for Godox X1R-N
- Page 1 无线引闪器 TTL Wireless Flash Trigger For Canon 深圳市神牛摄影器材有限公司 GODOX Photo Equipment Co., Ltd. 地址/Add: 深圳市宝安区福永镇福洲大道西新和村华发工业园A4栋 Building A4, Xinhe Huafa Industrial Zone, Fuzhou RD West, Fuyong Town, Baoan District, Shenzhen 518103, China 电话/Tel: +86-755-29609320(8062) 传真/Fax: +86-755-25723423 邮箱/E-mail: godox@godox.com Instruction Manual 说...
-
Page 2: Table Of Contents
Contents 规格参数 可控从属单元组 GR 分组模式下，最多5组(A/B/C/D/E) Ratio光比分组模式下，3组(A/B/C) Foreword Multi Flash Settings (Times & Frequency) 传输范围(约) >100米 Warning Multi Flash Settings (Output Value) 频道 32个 Names of Parts Group Settings 其他 Body Test Flash 时延设置 有(0~10ms，以100us为单位设置) Modeling Lamp Control LCD Panel 无线快门 接收器端可以通过2.5mm同步接口控制相机拍摄... -
Page 3: Foreword
Foreword Warning Do not disassemble. Should repairs become necessary, this product must be Thanks for your purchase of this X1C TTL wireless flash trigger. sent to an authorized maintenance center. This TTL wireless flash trigger can be used with a transmitter and one or more receivers for studio flash, speedlite, and camera shutter. -
Page 4: Names Of Parts
Names of Parts Names of Parts Body Receiver TEST Trigger Button Transmitter TEST Trigger Button --Half Press --Fully Press Battery Battery Compartment Compartment AF Assist Beam Switch --ON(AF Assist Beam outputs) --OFF(AF Assist Beam do not output) Micro USB Port Power Switch Micro USB Port Power Switch... -
Page 5: Accessories
Names of Parts Names of Parts Transmitter Panel Accessories 1. Remote Cable(C1, C3) 2. Sync Cable 3.Sync Adapter (A) Output Settings per Group in the M Mode; FEC Settings per Group in the TTL Mode (B) Mode Settings (C) Group (D) Currently Selected Group (E) Channel Settings Battery... -
Page 6: Using The Flash Trigger
Using the Flash Trigger Using the Flash Trigger The flash trigger features the following functions: 3. As a Wired Shutter Release 3.1 Connect the receiver and the camera by Remote 1. As a Wireless Studio Flash Trigger Cable (one end in receiver’s Shutter Release 1.1 Mount the transmitter on camera hotshoe and turn it Port, the other end in camera’s shutter port) on before turning on the camera. -
Page 7: Setting The Transmitter
Min. refers to the minimum power output value that can be set in M/Multi mode. X1C's minimum power output value is 1/128 for most of camera flashes. However, the value can change to 1/256 when using in combination with Godox strong power flashes e.g. AD600, etc. - 33 -... -
Page 8: Multi Flash Settings (Times & Frequency)
Setting the Transmitter Setting the Transmitter Multi Flash Settings (Times & Frequency) Group Settings 1. Long press the <GR> Button to set all effective groups simultaneously. 1. In the multi flash (TTL and M icon are not displayed), long press the <MODE> Button to 2. -
Page 9: Test Flash
Setting the Transmitter Setting the Transmitter Test Flash Automatically Enter Power Saving Mode 1. Press the <TEST> Trigger Button to see the 1. The flash trigger will go into standby mode after the transmitter enter sleep mode, and whether flash will fire normally or not. the displays on the LCD panel will disappear. - Page 10 Setting the Transmitter Setting the Transmitter Custom Functions Setting Signs Settings and Description Custom Functions Setting Signs Settings and Description Application Application Functions No. Functions No. Only send after the setting values have been Send the setting C.Fn-08 C.Fn-01 Single contact It is advisable to set the transmitter to single √...
-
Page 11: Wireless Shutter Release Mode
Setting the Transmitter Setting the Receiver Wireless Shutter Release Mode 4. The channel amount will increase from 1 to 32. When the current channel is 32, press the <CH> Button again and the channel 1 will be displayed on the panel. Half press the <TEST>... -
Page 12: Selecting The Operation Method
Selecting the Operation Method Selecting the Operation Method Transmitter: Multi Mode (In the NON-GR Mode) X1C Operation Method 1(by default） Button Operation Function TTL/M Mode (In the GR Mode or NON-GR Mode) Short press (under normal status) Enter CH settings; (under settings) Confirm and back to normal status Button Operation... - Page 13 Selecting the Operation Method Selecting the Operation Method X1C Operation Method 2 Multi Mode (In the NON-GR Mode) TTL/M Mode Button Operation Function Button Operation Function Short press (under normal status) Enter CH settings; (under settings) Confirm and back to normal status Short press (under normal status) Enter CH settings;...
-
Page 14: Attentions
Selecting the Operation Method Caring for Flash Trigger Avoid sudden drops. The device may fail to work after strong shocks, impacts, or [Note 3] There are 5 groups only in the GR mode while 3 groups in other modes. excess stress. Choose 3 or 5 groups by setting C.Fn-06 to 03 or 05. -
Page 15: Technical Data
Technical Data Technical Data Model Model Type For Canon Type For Canon Compatible Cameras Canon EOS cameras (E-TTL II autoflash) Transmission range(approx.) >100m Support for the cameras that have PC sync socket. Channel Builted-in remote system 2.4G Wireless Transmission Others Modulation mode Synchronization delay set Yes (0~10ms, use 100us as the unit)
Need help?
Do you have a question about the X1R-N and is the answer not in the manual?
Questions and answers