Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Gimenez Ganga saxun Aneas 80x80 Wall to Wall
Summary of Contents for Gimenez Ganga saxun Aneas 80x80 Wall to Wall
- Page 1 Technical manual Aneas 80x80 Wall to Wall...
-
Page 3: Table Of Contents
TECHNICAL MANUAL ANEAS 80X80 WALL TO WALL Table of contents 1. General safety recommendations. Use and prohibitions ..................4 1.1 Exploded view of Aneas 80x80 Wall to Wall ..........................4 2. Product description ....................................5 2.1 Exploded view of Aneas 80x80 Wall to Wall ...................................5 3. -
Page 4: General Safety Recommendations. Use And Prohibitions
1. General recommendations regarding safety. Use and restrictions In order to ensure the safe assembly, use and maintenance of Before assembly, it is very IMPORTANT for your safety and that this product, a number of precautionary measures must be taken. of the product to follow all the recommendations listed below. -
Page 5: Product Description
TECHNICAL MANUAL ANEAS 80X80 WALL TO WALL 2. Product description 2.1 Cutting of Aneas 80X48 Wall to Wall 3 | 3 11 11 Components Nº Code Description Nº Code Description 80x80 mm guide profile Single pulley 024647 022084 80x80 guide support with holes Double pulley 024679 022593... -
Page 6: Features
3. Features 3.1 Wind Classification (EN 13561:2004+A1:2008) CLASSIFICATION ACCORDING TO STANDARD EN 13561:2004+A1:2008 Line (m) ANEAS 2 guides 3 guides 2.00 2.25 2.50 2.75 3.00 3.25 3.50 3.75 4.00 4.25 4.50 4.75 5.00 5.50 6.00 6.50 7.00 2.00 2.00 2.50 2.75 3.00 3.25... -
Page 7: Profiles And Accessories
TECHNICAL MANUAL ANEAS 80X80 WALL TO WALL 4. Profiles and accessories 80x80x2 mm tube Aneas double stick outer cover 024646 024669 80x80 mm guide profile Aneas double stick outer cover - Anonymous 024647 024669 Aneas LED double stick profile Aneas double stick interior cover 024623 024638 Aneas double stick profile... - Page 8 Support screw kit — Aneas 80x80 Flange with cord clamp 024691 022111 Nylon flange pulley reinforced with bearings 35 mm screw clamp with screw stainless steel screw/nut 022994 022379 Reinforced nylon flanged pulley with bearings 60 mm End hook set 022756 022581 End hook set 60 mm...
-
Page 9: Views And Sections
TECHNICAL MANUAL ANEAS 80X80 WALL TO WALL Double nylon pulley Single pulley 022758 022084 Aneas interior side support 80x80 Double plastic pulley 024849 024041 80x80 guide support with holes 024679 5. Views and cross-sections 5.1 Supports cross-section 80x80 guide support with holes 16,1 33,5 38,25... -
Page 10: Profile Cutting
6. Profile cutting 6.1 Measurement of profiles *The width of the sticks will depend on the order 6.2 Structure layout plan Left Right guide guide Central guide... -
Page 11: Installation
TECHNICAL MANUAL ANEAS 80X80 WALL TO WALL 7. Installation 7.1 Fixing the structure Take the measurements and mark the respective walls indicating the position where the structure will be fixed, in order to ensure it is levelled correctly. 7.2 Assembly of the guides to the wall Attach the left-hand guide of the 80x80 mm beam to the walls by means of the guide supports (screws not included). -
Page 12: Fixing Of Pulleys
Attach the central guide (if fitted) and the right-hand 80x80 guide to the walls by means of the guide supports. Follow the screwing sequences in the same way as those carried out with the left-hand guide. 7.3 Fixing the pulleys Install a single pulley on the wall (screws not included). -
Page 13: Assembly Of The Sticks
TECHNICAL MANUAL ANEAS 80X80 WALL TO WALL 7.4 Assembly of the sticks Adjust the reinforced nylon-flanged pulleys (with stainless steel screw/nut bearings), the combined flange and cord clamp (in a centred position) and the end hook assembly to the width of the guides. 7.5 Assembly of hte final mounting kit Insert the final mounting assembly of the 80x80 slotted hole into the lower groove of the guides and hook it to the M10x100 DIN 931 screw that fixes the guide to the guide support. -
Page 14: Installation Of The Cord And Cord Cleats
7.6 Installation of the cord and cord cleats For the placement of the CORD CLEATS, the safety requirements under standard UNE-EN 13120:210:210+A1:2014 will be taken into account. Interior louvers. Presentation requirements including safety. The user must therefore be warned of the risks to small children, and the following considerations must be taken into account. - Small children may become strangulated by loops in stretching cords, chains, tapes and inner ropes that manoeuvre the product. - Page 15 TECHNICAL MANUAL ANEAS 80X80 WALL TO WALL To install the cord, insert the two ends of the cord through the Insert the two ends of the cord through the double double pulley that lowers the cord cleat leaving an adequate pulley of the central part.
-
Page 16: Maintenance
Once assembly has been completed, check to confirm correct operation. 8. Maintenance 8.1 Cleaning and care To clean the canvas, we recommend removing the dust that has For best use and extended durability of the screen, it is recom- accumulated without using water, to enable you to remove all the mended to carry out regular maintenance and checks at least surface particles by vacuuming, air blowing, beating or brushing. -
Page 17: Packaging Disposal
TECHNICAL MANUAL ANEAS 80X80 WALL TO WALL Annex I Disassembly and disposal of packaging and end-of-life product components. Packaging Disposal Important The recycling of the packaging must be carried out by the qualified professional who has installed the product. We advise you to recycle the product packaging responsibly: Paper and cardboard: In waste management, the recycling of paper and cardboard •... - Page 18 Attention Always act with care. Please only use suitable tools that are in perfect condition. • Step 1 • Step 5 Close the awning and remove the screws that fix the flange and Loosen and remove the fasteners that fix the guide supports to cord clamp to the last profile and remove the cord.
- Page 19 TECHNICAL MANUAL ANEAS 80X80 WALL TO WALL This symbol means that the product must not be disposed of together with household waste as it must be collected separately for recovery, reuse or recycling in accordance with local regulations. In compliance with Articles 4 and 13 Royal Decree 110/2015, of 20 February, on waste electrical and electronic equi- pment;...
- Page 20 Cables The recycling of electrical cables prevents the contamination that can come from these elements. Its re- cycling allows for the subse- quent use of the copper, aluminium and brass from the cables, once they are separated from their plastic insulation. Electrical and electronic waste must be taken to clean points for proper recycling Plastic Plastic recycling provides a sustainable source of raw material for the...
- Page 22 Giménez Ganga, S.L.U. Polígono Industrial El Castillo C/ Roma, 4 • 03630 Sax (Alicante) • España saxun.com...
Need help?
Do you have a question about the saxun Aneas 80x80 Wall to Wall and is the answer not in the manual?
Questions and answers