FORMING FUNCTION 4385605309 User Manual

USER MANUAL
ELEVATE MONITOR ARM
PARTS AND TOOLS
x1 PCE
A
B x1 PCE
C ×4 PCS M4x10
D ×4 PCS
E ×4 PCS
F ×1 PCE 2mm
G ×1 PCE 5mm
H ×1 PCE
6mm
Before installation, all measurements and conditions
Follow instructions, and if there are
must be verified on site. Neither Forming Function nor any
steps that are incomprehensible,
of its distributors can be held liable for product malfunc-
please let us know and we will get
tion or other defects as a result of improper installation.
back to you.
STEP 1
Use the 2 mm Allen key (F) to loosen the screw that is keeping
the arms of the monitor arm (A) in the clamp and remove it as
seen in the illustration. Put the arm and hexagon cup point
screw aside somewhere close and safe as it will be re-inserted
for STEP 3.
4385605309
ART. NO
4385605301
4385605302
53
1
REMOVE
LOOSEN
TIGHTEN
STEP 2
8~30MM
Turn grommet upside down and adhere the Pad (B) .
Use Allen Key (H) to adjust the height of the clamp so that
it fits your table. Tighten until sturdy and ascertain that the
clamp can not be moved from its position from the table.
STEP 3
Insert the removed arms into the clamp and
fasten the hexagon cup point screw with the
Allen key (F) Adjust the tension of the
rotation to your need.
To keep the arms completely rigid, fasten
the small cup point socket screws as tight
as possible while maintaning the intended
position.
Optional: Fasten the screw with the Allen
key (F) if you desire to limit the rotational
movements to 180°.
H
LOOSEN
TIGHTEN
ADHERE
PAD
RE INSERT
LOOSEN
TIGHTEN
FORMINGFUNCTION.SE