Advertisement
Quick Links
USER MANUAL
Hold Dual Monitor Arm
PARTS AND TOOLS
×1 PCE
A
×1 PCE
B
C
×1 PCE
D
×8 PCS
×1 PCE
4mm
E
×1 PCE
F
G
×2 PCS
H
×1 PCE
2mm
I
×2 PCS
M8x15
J
×2 PCS
M8x30
K
×1 PCE
5mm
Before assembly, please spend some time reading this manual and follow the
procedures step by step. Do not discard any of the packaging until you have
checked all the parts.
lf you are missing any of the parts, please contact the seller from which you
purchased your products. The staff will do their best to help you.
4181502702
ART. NO
4181502709
4181502701
27
1
STEP 1
1
2
Desk thickness from 15mm~30mm.
(max 30 with pad removed).
Adjust and fix the clamp on the desk.
STEP 2
lnsert the twin monitor bracket into the pole.
Adjust to desired height and fix its position
using the provided Allen key.
Then put the plastic cover
through the pole and check
the pin position with the
3
hole together.
E
FORMINGFUNCTION.SE
Advertisement
Related Manuals for FORMING FUNCTION Hold Dual Monitor Arm 27
Summary of Contents for FORMING FUNCTION Hold Dual Monitor Arm 27
- Page 1 USER MANUAL 4181502702 ART. NO Then put the plastic cover 4181502709 4181502701 through the pole and check the pin position with the hole together. STEP 1 Hold Dual Monitor Arm PARTS AND TOOLS ×1 PCE ×1 PCE Desk thickness from 15mm~30mm. (max 30 with pad removed).
- Page 2 USER MANUAL Adjustment: Use the Allen key (K) to adjust the STEP 3 STEP 4 STEP 1 STEP 1 STEP 5 tension to correspond to the weight of the monitor. Twist the Allen key in a clockwise direction for heavier monitors, and counterclockwise for When the joint is loose, please use the lighter monitors Allen Key (5mm) to tighten the arm.
Need help?
Do you have a question about the Hold Dual Monitor Arm 27 and is the answer not in the manual?
Questions and answers