Table of Contents
Advertisement
Setting up your device
Insert the battery
Warning: Use only the battery that Research In
Motion® specifies for use with your device. See
the Safety and Product Information Booklet for
more information about using the battery safely.
1.
Press the battery cover release button.
2.
Slide off the battery cover.
3.
Insert the battery so that the connectors on
the battery align with the connectors on your
device.
4.
Replace the battery cover.
5.
If the battery is charged, your device turns on
and the confirm date and time dialog box
appears.
•
If the date and time are incorrect, click
Edit. See "Set the date and time" on
page 16 for more information.
•
If the date and time are correct, click OK.
Charge the battery
1.
Connect the small end of the USB cable to
your device.
2.
Depending on the type of travel charger that
you received with your device, you might
need to slide the plug blade attachment into
the power adapter or pull the plug blades
down.
PUSH
3.
Plug the power adapter into a power outlet.
4.
Charge the battery to full power.
Note: If you install the BlackBerry Desktop
Software on a computer, you can charge your
device by connecting it to that computer. See
"Can I charge my device by connecting it to my
computer?" on page 19 for more information.
Connect to the wireless network
On the device, if the power is off, press the Power
button. Your device should connect to the wireless
network automatically.
5
Advertisement
Table of Contents
