Setting Up Your Device; Insert The Sim Card; Insert The Battery - Blackberry 8700G - GETTING STARTED GUIDE & RETAIL Getting Started Manual

Setting up your device

Insert the SIM card

Your SIM card contains important information
about your wireless service. Your SIM card might
be inserted already.
Warning: Turn off your device before you insert or
remove the SIM card. Do not scratch, bend, or
expose the SIM card to static electricity or wet
conditions.
1. Press the battery cover release button.
2. Slide off the battery cover.
3. If the battery is inserted, remove it.
4. Hold the SIM card with the metal contacts
facing down so that the notches on the card
align with the notches shown on your device.
4
5. Slide the SIM card into the SIM card holder
so that it lies flat below the metal guide.
6. Continue to slide the SIM card into the SIM
card holder until it stops. One end of the SIM
card should be slightly hidden below the
plastic casing on your device.
Note: To remove the SIM card, press gently on the
top of the SIM card and slide it out of the SIM
card holder.

Insert the battery

Warning: Use only the battery that Research In
Motion® specifies for use with your device. See
the Safety and Product Information booklet that
accompanied your device for more information
about using the battery safely.
1. Press the battery cover release button.
2. Slide off the battery cover.