Dell MTC2 User Manual page 60

When the boot device list appears, highlight Boot to Utility Partition and press
3
<Enter>.
When the Dell Diagnostics Main Menu appears, select the test you want to run (see
4
page 59).
Starting the Dell Diagnostics From the ResourceCD
Insert the ResourceCD.
1
Shut down the computer through the Start menu (see page 28) and restart the
2
computer.
When the DELL logo appears, press <F12> immediately.
If you wait too long and the Windows logo appears, continue to wait until you see the
Windows desktop. Then shut down your computer through the Start menu and try
again.
NOTE: This feature changes the boot sequence for one time only. On the next start-up, the
computer boots according to the devices specified in the system setup program.
When the boot device list appears, highlight IDE CD-ROM Device and press
3
<Enter>.
Select the IDE CD-ROM Device option from the CD boot menu.
4
Select the Boot from CD-ROM option from the menu that appears.
5
Type
6
Type
7
Select Run the 32 Bit Dell Diagnostics from the numbered list. If multiple versions
8
are listed, select the version appropriate for your computer.
When the Dell Diagnostics Main Menu appears, select the test you want to run (see
9
page 59).
Dell Diagnostics Main Menu
After the Dell Diagnostics loads and the Main Menu screen appears, click the button
1
for the option you want.
60
Advanced Troubleshooting
to start the ResourceCD menu.
1
to start the Dell Diagnostics.
2