Labeling; Transceivers - Dell M8428-K Hardware Reference Manual

FIGURE 2
1
2
3
4

Labeling

Figure 2
the release lever on the enclosure (visible only when the lever is extended).

Transceivers

NOTE
You must install Dell-approved transceivers in the switch module.
The converged network switch was designed to work with small form-factor pluggable (SFP) optical
modules. The basic switch module ships with four 8 Gbps Dell-approved transceivers for the Fibre
Channel ports.
NOTE
You can also install 4 Gbps transceivers in the FC ports of the switch module. All transceivers must
be Dell-approved.
Dell M8428-k Hardware Reference Manual
53-1001980-01
Top view
Switch module release lever
Release latch
Product label including serial number
Midplane connectors
shows the labels appearing on the switch module. A second serial label is located beneath
Hardware description
1
5