In This Chapter; Npiv Mode Default Port Mapping; Processor And Memory Specifications - Dell M8428-K Hardware Reference Manual

Dell M8428-k specifications

In this chapter

NPIV Mode default port mapping

The switch module contains 28 total ports. Of these, F_Ports are ports 1-24 and N_Ports are ports
0 and 25-27.
In NPIV mode, the switch module F_Ports are mapped to N_Ports. The following table lists the
factory-default F_Port to N_Port mapping for NPIV mode.
TABLE 4
F_Ports
1-4, 17, 18
5-8, 19, 20
9-12, 21, 22
13-16, 23, 24
Ports 17-24 are the eight external CEE ports.

Processor and memory specifications

The processor and memory installed in the switch module are shown in
Dell M8428-k Hardware Reference Manual
53-1001980-01
•
NPIV Mode default port mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
•
Processor and memory specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
•
Weight and physical dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
•
Facility requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
•
Electrical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
•
Architectural specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
•
Supported mezzanine cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
•
Fibre Channel standards compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
•
Regulatory compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
•
Environmental regulation compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
NPIV mode port mapping
mapped to N_Ports
25
26
27
0
Appendix
A
Table 5.
27