Changing Your Audio Settings; Enabling The Display Settings For A Tv - Dell Inspiron 9300 Owner's Manual

7 Turn on the TV, turn on any audio device that you connected (if applicable), and then turn on
the computer.
8 See "Enabling the Display Settings for a TV" on page 41 to ensure that the computer
recognizes and works properly with the TV.

Changing Your Audio Settings

You can set the speaker configuration for PC speakers, headphones, or S/PDIF (digital output).
1 Double-click CyberLink PowerDVD in the All Programs menu.
2 Click Settings.
3 Click DVD.
4 Click Audio Settings.
5 Under Speaker Configurations, select your desired output.
6 Click Back twice to return to the main menu.
If you selected SPDIF in step 5, also verify the following settings:
Exit PowerDVD.
a
Double-click the speaker icon in the Windows notification area.
b
Click the Options menu and then click Advanced Controls.
c
Click Advanced.
d
Click Enable S/PDIF.
e
Click Close.
f
Click OK.
g
Reopen PowerDVD.
h
7 Insert a DVD into the DVD drive.
The DVD will autorun.

Enabling the Display Settings for a TV

Your computer may have either an ATI video-controller card or an NVIDIA video-controller
card. See the following subsection that corresponds to the video controller installed in your
computer.
ATI Video-Controller Card
NOTE:
Ensure that you properly connect the TV before you enable the display settings.
1 Click the Start button and click Control Panel.
2 Click Appearances and Themes.
3 Under or pick a Control Panel icon, click Display.
Using CDs, DVDs, and Other Multimedia
41