Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Philco PCD7H
Summary of Contents for Philco PCD7H
- Page 1 PCD7H Dryer...
-
Page 2: Explanation Of Symbols
Read this manual prior to initial operation of the product! Dear Customer, We hope that your product, which has been manufactured in modern facilities and passed through a strict quality control procedure, will give you very good results. We advise you to read through this manual carefully before using your product and keep it for future reference. This User Manual will •... -
Page 3: Important Safety Information
Important safety information This section includes safety information that will help plenty of detergent before being dried in the dryer. protection from risks of personal injuries or materialistic • Garments or pillows bolstered with rubber foam damages. Failure to follow these instructions shall cause (latex foam), shower bonnets, water resistant textiles, any warranty and reliability commitment to become void. -
Page 4: Intended Use
are left at a temperature that will not damage them. • Fabric softeners or similar products should be used as specified by the fabric softener instructions. • Underwear that contains metal reinforcements should not be placed in a dryer. Damage to the dryer can result if metal reinforcements come loose during drying. -
Page 5: Appropriate Installation Location
Installation Under counter installation Refer to the nearest Authorised Service Agent for • A special part (Part no. 297 360 0100) replacing installation of your product. the top trim must be provided and installed by the Preparation of location and electrical installation for Authorised Service Agent in order to use the machine the product is under customer’s responsibility. -
Page 6: Electrical Connection
First use Important: • The hose should be attached to a height of maximum • To have the product ready for operation before 80 cm. calling the authorised service agent, make sure • You must be careful not the pinch or bend the hose. that its location and power supply installations are •... -
Page 7: Technical Specification
Technical specification Height (adjustable) 84.6 cm Width 59.5 cm Depth 53 cm Capacity (max.) 7 kg Weight (net) 36 kg Voltage Rated power input See type label Model code Type label is located behind the loading door. 7 EN... -
Page 8: Initial Preparations For Drying
Initial preparations for drying hings to be done for energy saving: A B C • Make sure that you operate the product at its full capacity but pay attention to not exceeding it. • Spin your laundry at the highest speed possible when washing them. -
Page 9: Preparing Laundry For Drying
pads should not be dried in the dryer. Following weights are given as examples. • Do not use fabric softeners and anti-static products Approximate unless they are recommended by the manufacturers of Home articles weights (g) the fabric softener or the product. •... -
Page 10: Control Panel
Selecting a Programme and Operating Your Machine Control panel 1. Washing machine spin speed*/ Timer pro- 6. Anti-creasing gramme selection Prevents the laundry from creasing after the machine Spin speed used to spin the laundry in the washing completes its programme. macthine / Indicates the time for timer programs. -
Page 11: Preparing The Machine
at the recommended spin speeds in the washing Preparing the machine machine. 1. Plug in your machine. •Shirt 2. Place the laundry in the machine. This programme dries the shirts more sensitively and 3. Press the “On/Off” button. creases them less and thus, helps to iron them more Pressing the “On/Off”... -
Page 12: Time Display
You can select one of the 10 min., 20 min., 30 min., 40 min., 50 min., 60 min., 80 min., 100 min., 120 min., 140 min. and 160 min. timer programmes to achieve the desired final drying level at low temperatures. Programme dries at the selected time regardless of the drying temperature. - Page 13 Programme selection and consumption table Programme table Approximate Spin speed in washing Drying time Programs Capacity (kg) amount of remaining machine (rpm) (minutes) humidity Cottons / Coloreds Extra dry 1000 % 60 Cupboard dry 1000 % 60 Iron dry 1000 % 60 Express 35' 1200...
-
Page 14: Auxiliary Function
Auxiliary function Perform the same procedure to revert back to the previous contrast setting. Audio Warning Warning indicators Warning indicators may differ according to the model Cancel Audio warning Audio warning Audio warning audio warning level 1 level 2 level 3 of your machine. - Page 15 Time delay symbols indicates the step that is being carried out. “Drying”: With the “Time delay” function you can delay the programme start up to 24 hours. - Lights up in all programmes apart from drying and 1. Open the loading door and put the laundry in. ventilation.
-
Page 16: Childproof Lock
Ending the programme through canceling program duration and increase energy consumption. Therefore, it is recommended to add laundry before A new program can be selected and started after the drying programme has started. “Program cancel” is activated in order to change the If you select a new programme by turning the drying program. -
Page 17: Filter Cartridge / Door Inner Surface
Maintenance and cleaning Filter Cartridge / Door Inner Surface Lint and fibres released from the laundry to the air during the drying cycle are collected in the “Filter Cartridge”. Sensor Such fibre and lint are generally formed during wearing and washing. Always clean the filter and the inner surfaces of the cover after each drying process. -
Page 18: Water Tank
Water tank; For the condenser; The moisture in the damp laundry is taken from the Hot and humid air in the condenser is cooled with the laundry and condens ed. Drain the water tank after each cold air from the room. Thus, the humid air circulating in drying cycle or during drying when “Water tank”... - Page 19 4. Clean the condenser by applying pressurized water with a shower armature and wait until the water drains. 5. Place the condenser in its housing. Fasten the 2 locks and make sure that they are seated securely. 6. Close the kick plate cover. 19 EN...
-
Page 20: Suggested Solutions For Problems
Suggested solutions for problems Drying process takes too much time • Meshes of the filter may be clogged. Wash with water. Laundry comes out wet at the end of drying. • Meshes of the filter may be clogged. Wash with water. •... - Page 21 21 EN...
Need help?
Do you have a question about the PCD7H and is the answer not in the manual?
Questions and answers