Table of Contents
Advertisement
BURST IMAGE CAPTURE
Burst image capture is similar to the continuous-drive mode on the conventional
cameras. This digital camera will continuously take pictures while the shutter-release
button is held down.
The maximum number of images that can be captured at a time is follows:
Image Quality
The Maximum Number of Images
S.FINE (Super Fine)
FINE (Fine)
STD. (Standard)
ECON. (Economy)
With no relation to the Image Size (see page 54), the maximum number of images
captured at a time is same.
Turn the Function dial to
Move the lens cover slide to
to open the lens cover.
Press the display / ENTER button
to turn on the LCD monitor if
desired.
1
4
8
12
.
• The camera will be turned on and be set to
REC (Record) mode.
- 36 -
BURST IMAGE CAPTURE
Frame the picture as instructed
in "BASIC RECORDING
PROCEDURE", steps 4 and 5.
• The built-in flash does not operate in Burst
image capture.
Press and hold the shutter-
release button all the way down.
• The shutter will continuously release until
your finger is lifted from the shutter-release
button, or the maximum number of images
has been captured.
• The focus and exposure for the series are
determined when the shutter-release button
is pressed part-way down before the pictures
are taken.
- 37 -
Advertisement
Table of Contents
