Subscribe to Our Youtube Channel
Related Manuals for Netti 4U Series
Summary of Contents for Netti 4U Series
- Page 1 4U CED 4U CED 4U CED User Manual This product conforms to 2017/745/EU for medical products. UM0002 UK 2024-01...
-
Page 2: Table Of Contents
CONTENTS INTRODUCTION AREAS OF USE / INDICATIONS FOR NETTI 4U CED / CEDS / CED XL CONTRAINDICATIONS QUALITY AND DURABILITY THE ENVIRONMENT AND WASTE DISPOSAL INFORMATION FOR RE-USE ABOUT THIS MANUAL VITAL MEASURES QUICK REFERENCE DESCRIPTION FEATURES OF NETTI 4U CED / CEDS / CED XL... - Page 3 12. TESTS & WARRANTY 12.1 TESTS 12.2 WARRANTY 12.3 CLAIM 12.4 NETTI CUSTOMIZED / INDIVIDUAL ADAPTATIONS 12.5 COMBINATIONS WITH OTHER PRODUCTS 12.6 SERVICE AND REPAIR 13. MEASUREMENTS & WEIGHT Model: Netti 4U CED, CEDS & CED XL Language: English Version: 2024-01 My-Netti.com...
-
Page 4: Introduction
Netti 4U CED is available in 3 versions: Max user weight: 160 kg: Netti 4U CED with standard seat depths. Netti 4U CED XL with seat widths 550 & 600 mm. Max user weight: 130 kg: Netti 4U CEDS with shorter seat depth. -
Page 5: Areas Of Use / Indications For Netti 4U Ced / Ceds / Ced Xl
/ or mental European standard EN 12183. disabilities. These disabilities may have multiple causes. Netti 4U CED, CEDS and CED XL have an adjustable seat and back angle, thus facilitating for As manufacturer, Alu Rehab A.S evaluates the test to the user change of position, mobilisation or posture be equal to 5 –... -
Page 6: The Environment And Waste Disposal
• Push bar / handles area. • Anti-tip Netti 4U CED, CEDS and CED XL are designed Please also note the content of chapter 10.2 for temperature range from –10°C to +40°C. Cleaning and washing instructions. -
Page 7: About This Manual
1.6 ABOUT THIS MANUAL 1.7 VITAL MEASURES In order to avoid damages while using the Netti 4U Netti 4U CED, CEDS and CED XL are comfort CED, CEDS or CED XL wheelchair, please read this wheelchairs designed for both outdoor and indoor manual carefully before starting to use the chair. - Page 8 R860 mm – Model with 24” main wheels. Measured without cushions. Netti 4U CED and Netti 4U CEDS are similar chairs except for the shorter seat depth on Netti 4U CEDS. Model: Netti 4U CED, CEDS & CED XL My-Netti.com...
-
Page 9: Quick Reference
The content of this page is a summary of the whole manual. It gives you a brief introduction to the use Always used the anti-tips, they and care of the Netti 4U CED, CEDS and CEDS XL are for the safety of the user. wheelchairs. -
Page 10: Description
Product configuration may vary between different countries. Netti 4U CED, CEDS and CED XL are similar chairs except for different seat widths and the shorter seat depth on Netti 4U CEDS. Model: Netti 4U CED, CEDS & CED XL My-Netti.com... -
Page 11: Features Of Netti 4U Ced / Ceds / Ced Xl
4. FEATURES OF NETTI 4U CED / CEDS / CED XL STANDARD ACCESSORIES BELTS • Hip belts (See chapter 5) SEAT SEAT • Pressure distributive cushion Netti Uno • Pressure distributive cushions • Tilt –5° to +20° • Hip belts (See chapter 5) •... -
Page 12: Accessories
(Chapter 5.1 for mounting). Model: Netti 4U CED, CEDS & CED XL My-Netti.com Language: English Version: 2024-01... - Page 13 2 tray models: Swingable and lockable FOOT BOARD UPHOLSTERY UPHOLSTERY FOR TRAY Offers a soft base for the arm resting on the tray. ANKLE HUGGERS TOOL SET Model: Netti 4U CED, CEDS & CED XL Language: English Version: 2024-01 My-Netti.com...
-
Page 14: Mounting Of Hip Belt
• Fix the hip belt bracket to the backrest hinge in the rearmost hole, using the enclosed screws and nut. 2 pcs 13 mm open-end spanner. Model: Netti 4U CED, CEDS & CED XL My-Netti.com Language: English Version: 2024-01... -
Page 15: Electrical Components
5.3 ELECTRICAL COMPONENTS 5.4 NETTI DYNAMIC SYSTEM KIT Netti III EL is a wheelchair equipped with electrical INTENDED USE operation of tilt, recline and leg supports. The chair may be equipped with one or several electrical Netti Dynamic System is an advanced mobility functions. - Page 16 THE NETTI DYNAMIC SYSTEM CONCEPT: What is Netti Dynamic Seating? Netti Dynamic System is a tilt and recline wheelchair which allows controlled Open Kinetic Chain (OK-C) movements of the user. Static comfort wheelchairs can be accommodated to support the user’s distal segments.
-
Page 17: Chair Back Height
• The character and strength of the body part extensions and movement patterns • Goals and improvement regarding the user’s Netti Dynamic System can be equipped with several “Activity daily life” and health condition. different types of pelvic stabilizer and supportive harnesses each type developed to give the user The user’s movement pattern and muscle tone may... -
Page 18: Assembling And Adjustment
Head support A: 1,0 kg If it still does not lock, do not use Head support C: 0,9 kg the wheelchair but contact your dealer. Model: Netti 4U CED, CEDS & CED XL My-Netti.com Language: English Version: 2024-01... -
Page 19: Front Castors
Sand and sea water (salt used for gritting in the winter) can damage the bearings of the main wheels and front castors. Clean the wheelchair thoroughly after exposure. Model: Netti 4U CED, CEDS & CED XL Language: English Version: 2024-01 My-Netti.com... -
Page 20: Seat Height Adjustment
Check the position of the anti-tip and re-adjust the brakes after mounting the main 2 pcs 24 mm open-end spanners. wheels or changing the main wheel position. Model: Netti 4U CED, CEDS & CED XL My-Netti.com Language: English Version: 2024-01... -
Page 21: Backrest
To check that the backrest is locked, grip the push bow and press the backrest forward. If the backrest falls forward – repeat the locking procedure or contact your local dealer. Model: Netti 4U CED, CEDS & CED XL Language: English Version: 2024-01 My-Netti.com... -
Page 22: Seat Depth Adjustment At The Rear
Check that the hole in the backrest hinge adjustment piece should not be pulled out and the plastic bracket are mounted in more than 50 mm. parallel position. 6 mm Allen-key. Model: Netti 4U CED, CEDS & CED XL My-Netti.com Language: English Version: 2024-01... -
Page 23: Anti-Tips
• This extension piece has two holes. Place it in the required position and tighten the screw. 5 mm Allen-key. The anti-tip should always be used for the safety of the user. Model: Netti 4U CED, CEDS & CED XL Language: English Version: 2024-01 My-Netti.com... -
Page 24: Backrest Cushion
6.10 BACKREST CUSHION* 6.11 LEG SUPPORTS Backrest cushions are fixed and adjusted onto the Netti 4U CED is delivered with manual Angle wheelchair using the Velcro. Adjustable leg support. Universal leg support can be ordered instead, shown Backrest cushions are attached with a Velcro system. - Page 25 It is swingable and removeable. The foot plates are foldable and can be angled in fixed positions. They are delivered with height and depth adjustable calf support. Model: Netti 4U CED, CEDS & CED XL Language: English Version: 2024-01 My-Netti.com...
- Page 26 • Release the leg support by pulling it slightly straight up. • Swing the leg support outwards. • Lift and remove the leg support. 5 mm Allen-key. Model: Netti 4U CED, CEDS & CED XL My-Netti.com Language: English Version: 2024-01...
-
Page 27: Leg Supports
• The head support bracket is fixed by tightening the four screws two by two diagonally so the bracket is fixed with the same strength divided on the four screws. Model: Netti 4U CED, CEDS & CED XL Language: English Version: 2024-01 My-Netti.com... - Page 28 • Move the adapter to the required position and fix the adapter by tightening the screws diagonally. Remember to release the levers when adjusting the head support. Model: Netti 4U CED, CEDS & CED XL My-Netti.com Language: English Version: 2024-01...
-
Page 29: Arm Support
Be aware of potential squeeze hazard • Press the red knob for to adjust the depth between arm support and top frame of the arm support. tube when locking arm support. Model: Netti 4U CED, CEDS & CED XL Language: English Version: 2024-01 My-Netti.com... -
Page 30: Adjusting The Parking Brakes
• Adjust the brake position and tighten the screws. 22” and 24” wheels can also have drum brakes. Model: Netti 4U CED, CEDS & CED XL My-Netti.com Language: English Version: 2024-01... - Page 31 1 pc 10mm open-end spanner. To ensure the correct functions of the wire, these must never be taut. Never leave the user alone in the wheelchair without activating the parking brakes. Model: Netti 4U CED, CEDS & CED XL Language: English Version: 2024-01 My-Netti.com...
-
Page 32: Push Bow
• Always hold on to the crossbar when lifting the wheelchair. Alu Rehab recommends the use of a hip belt to prevent falling out of the chair. Model: Netti 4U CED, CEDS & CED XL My-Netti.com Language: English Version: 2024-01... -
Page 33: Backrest Angle
If necessary it should be improved by moving the main wheels further back. Always use anti-tippers when recline and tilt functions are being activated. Model: Netti 4U CED, CEDS & CED XL Language: English Version: 2024-01 My-Netti.com... -
Page 34: Decrease The Possibility Of Sliding, Shear And Pressure Sores
ASSURE THAT THE USER IS SAFE WHEN THE TILT OR RECLINE FEATURES ARE GOING TO BE ADJUSTED: The tilt and recline functions of all Netti comfort wheelchair models is a «one hand operation», including the dynamic wheelchair models. This is a great benefit for the user. -
Page 35: Operating Recline Handle: Reclining The Back
61671.78 g 1:15 REPLACED FOR This drawing is Alu Rehab A.S property and should not be copied or delivered to other firms or agents without our permission. Model: Netti 4U CED, CEDS & CED XL Language: English Version: 2024-01 My-Netti.com... -
Page 36: Manoeuvring
100 mm rearwards making the front castors turn forward. Companion: If the user is left alone in the wheelchair, always lock the brakes and check that the anti-tips are turned down. Model: Netti 4U CED, CEDS & CED XL My-Netti.com Language: English Version: 2024-01... -
Page 37: Driving Techniques - Step Down
Move the upper part of the body backwards to maintain balance of the chair. Control the speed of the chair by clutching the push rims. Do not use the brakes. Model: Netti 4U CED, CEDS & CED XL Language: English Version: 2024-01 My-Netti.com... -
Page 38: Driving Techniques - Up Stairs
The companions should use the strength in their legs carrying the chair, avoiding unnecessary stress on the back. Model: Netti 4U CED, CEDS & CED XL My-Netti.com Language: English Version: 2024-01... -
Page 39: Transfer
Never stand on the foot plates • Lock the brakes. due to the risk of tipping • Tilt chair forward. forwards. Model: Netti 4U CED, CEDS & CED XL Language: English Version: 2024-01 My-Netti.com... -
Page 40: Lifting The Wheelchair
To avoid this risk, we Please study the User manual UM0131 – recommend spoke protectors as accessory. How to use a Netti wheelchair as seat in a car, where even more details are available. If you want / need to change push rims or... - Page 41 SECURING THE USER Netti 4U CED has been crash tested without any power assistant device etc. If, at a later point of time a power kit, stair climber etc. is mounted, you Always use 3-point car need to check if your power assistant device is crash occupant restraint belts.
-
Page 42: Folding For Transport
• When the wheelchair is unoccupied, fold it as Netti 4U CED is used as a seat in a car. described below. Put the wheelchair in the trunk or back seat. When placed in the back seat, secure If a Netti head support is mounted correctly all parts and the frame using safety belts. -
Page 43: Transport In Airplane
9.3 TRANSPORT IN AIRPLANE 9.4 TRAVELLING ON PUBLIC TRANSPORT Netti 4U CED, CEDS and CED XL wheelchairs may be The wheelchair should be put in a special area for transported in airplane without any restrictions. wheelchairs. The wheelchair should face opposite Netti 4U CED, CEDS and CED XL wheelchairs are the direction of travel. -
Page 44: Maintenance
As a rule of thumb, use oil on movable parts Clean cushions and covers according to and all bearings. Alu Rehab recommends use instructions printed on cushions. of ordinary bicycle oil. Model: Netti 4U CED, CEDS & CED XL My-Netti.com Language: English Version: 2024-01... -
Page 45: Long Term Storing
Before it being used again, complete the above maintenance instructions. SPARE PARTS The Netti chairs are built of modules. Alu Rehab carries stock of all parts and is ready to supply these on short notice. Necessary instructions for mounting will follow the parts. -
Page 46: Troubleshooting
When in need of spare parts, please contact your dealer. When making changes affecting frame construction, contact dealer / manufacturer for confirmation. Model: Netti 4U CED, CEDS & CED XL My-Netti.com Language: English Version: 2024-01... -
Page 47: Tests & Warranty
12. TESTS & WARRANTY 12.1 TESTS Netti 4U CED, CEDS and CED XL are tested and have This warranty is only valid when the user use, maintain and handle the wheelchair as been approved for usage both indoors and outdoors. -
Page 48: Netti Customized / Individual Adaptations
Substitutions or alterations of components from Rehab AS Norway will not be valid. third part suppliers to Netti 4U CED, CEDS and CED XL requires the risk evaluation and acceptance of If there are any uncertainty about special fitting and the product responsibility and safety for use of the adaptations, please contact Alu Rehab A.S. -
Page 49: Measurements & Weight
Max user weight is 160 kg when Netti 4U CED and CED XL are being used as a seat in a vehicle. Max user weight is 130 kg when Netti 4U CEDS is being used as a seat in a vehicle. - Page 50 Model: Netti 4U CED, CEDS & CED XL My-Netti.com Language: English Version: 2024-01...
- Page 51 Model: Netti 4U CED, CEDS & CED XL Language: English Version: 2024-01 My-Netti.com...
- Page 52 Manufacturer of Netti: EU Distributor Alu Rehab ApS Alu Rehab AS Kløftehøj 8 Bedriftsvegen 23 DK-8680 Ry N-4353 Klepp Stasjon Denmark Norway info.ry@meyragroup.com post.klepp@meyragroup.com T: +45 87 88 73 00 T: +47 51 78 62 20 F: +45 87 88 73 19 my-netti.com...
Need help?
Do you have a question about the 4U Series and is the answer not in the manual?
Questions and answers