Planet MII-TP User Manual

Fast / gigabit ethernet switch module

Advertisement

Quick Links

Trademarks
Copyright © PLANET Technology Corp. 2005.
Contents subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.
Disclaimer
PLANET Technology does not warrant that the hardware will work properly in
all environments and applications, and makes no warranty and representa-
tion, either implied or expressed, with respect to the quality, performance,
merchantability, or fitness for a particular purpose.
PLANET has made every effort to ensure that this User's Manual is accurate;
PLANET disclaims liability for any inaccuracies or omissions that may have
occurred.
Information in this User's Manual is subject to change without notice and does
not represent a commitment on the part of PLANET. PLANET assumes no re-
sponsibility for any inaccuracies that may be contained in this User's Manual.
PLANET makes no commitment to update or keep current the information
in this User's Manual, and reserves the right to make improvements to this
User's Manual and/or to the products described in this User's Manual, at any
time without notice.
If you find information in this manual that is incorrect, misleading, or incom-
plete, we would appreciate your comments and suggestions.
FCC Warning
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment gen-
erates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the Instruction manual, may cause harmful interfer-
ence to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
CE Mark Warning
This is a Class A product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures.
Revision
User's manual for Fast / Gigabit Ethernet Switch Module
For model: MII-TP / MII-SC / MII-ST / MII-S15 / MII-SA20 / MII-SB20 /
MII-GT/ MII-SX / MII-LX / MII-L40 / MII-L70 / MII-SFP /
MII-LA15 / MII-LB15
Rev: 5.0(February.2005)
Part No: 2010-000021-004

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MII-TP and is the answer not in the manual?

Questions and answers

Summary of Contents for Planet MII-TP

  • Page 1 Revision User’s manual for Fast / Gigabit Ethernet Switch Module For model: MII-TP / MII-SC / MII-ST / MII-S15 / MII-SA20 / MII-SB20 / MII-GT/ MII-SX / MII-LX / MII-L40 / MII-L70 / MII-SFP / MII-LA15 / MII-LB15 Rev: 5.0(February.2005)
  • Page 2: Table Of Contents

    Chapter 2 MODEL LIST Chapter 3 CHECKLIST Chapter 4 INTRODUCTION 4-1 1-Port 10/100Base-TX Ethernet Module - MII-TP 4-2 1-Port 100Base-FX Fast Ethernet Modules - MII-SC / MII-ST / MII-S15 / MII-SA20 / MII-SB20 4-3 1-Port 1000Base-T Gigabit Ethernet Module - MII-GT...
  • Page 3: Chapter 1 Overview

    Chapter 1 OVERVIEW Thank you for purchasing PLANET MII family Fast/Gigabit Ethernet module. The MII family Fast/Gigabit Ethernet module can install into PLANET FNSW/FGSW family Switch. The distance can be extended from 100 meters (TP), 2 kilometers (Multi-mode, SC or ST), up to 70 kilometers (Single-mode, SC/LC).
  • Page 4: Chapter 3 Checklist

    If any item is missing or damaged, please consult the dealer from whom you purchased your MII family Fast/Gigabit Ethernet module. Chapter 4 INTRODUCTION 4-1 1-Port 10/100Base-TX Ethernet Module - MII-TP Figure 1. 1-Port 10/100Base-TX Fast Ethernet Module Front View Features: ● Comply with IEEE802.3 Ethernet, IEEE802.3u Fast Ethernet standard ●...
  • Page 5 LED DEFINITION Color Function Lit: indicate the link through that port is successfully established. LNK/ACT Green Blink: indicate that the switch is actively sending or re- ceiving data over that port. Lit: indicate that the port is operating at 100Mbps. Orange Off: indicate that the port is operating at 10Mbps.
  • Page 6: 1-Port 100Base-Fx Fast Ethernet Modules - Mii-Sc / Mii-St / Mii-S15 / Mii-Sa20 / Mii-Sb20

    4-2 1-Port 100Base-FX Fast Ethernet Modules - MII-SC / MII-ST / MII-S15 / MII-SA20 / MII-SB20 Figure 3. 1-Port 100Base-FX (SC, Multi-mode) Module Front View Features: ● Comply with IEEE802.3u, 100Base-FX Fast Ethernet standard ● 1 x 100Base-FX fiber ports (SC/ST/single SC fiber connectors) ●...
  • Page 7 LED DEFINITION Color Function Lit: indicate the link through that port is successfully es- tablished. LNK/ACT Green Blink: indicate that the switch is actively sending or receiv- ing data over that port. Lit: indicate that port is operating in full-duplex mode. Off: indicate that port is operating in half-duplex mode.
  • Page 8 Figure 5. 100Base- FX module duplex mode setting of console interface Table 4 below shows the settings for working under 100Mbps full-duplex mode and half- duplex mode. Both module (slide-switch) and the switch (console interface) should be fixed on the same mode. Speed/duplex 100Full-duplex mode 100Half-duplex mode...
  • Page 9: 1-Port 1000Base-T Gigabit Ethernet Module - Mii-Gt

    4-3 1-Port 1000Base-T Gigabit Ethernet Module - MII-GT Figure 6. 1-Port 1000Base-T Module Front View Features: ● Comply with IEEE802.3 Ethernet, IEEE802.3u Fast Ethernet, IEEE 802.3ab Gigabit Ethernet standard ● 1 X 10/ 100/1000Mbps N-Way auto-negotiation switch port ● Automatic MDI/MDI-X crossover function ●...
  • Page 10: 1-Port 1000Base-Sx/Lx Gigabit Ethernet Modules - Mii-Sx / Mii-Lx / Mii-L40 / Mii-L70 / Mii-La15 / Mii-Lb15

    4-4 1-Port 1000Base-SX/LX Gigabit Ethernet Modules - MII-SX / MII-LX / MII-L40 / MII-L70 / MII-LA15 / MII-LB15 Figure 7. 1-Port 1000Base-SX Module Front View Features: ● Comply with the IEEE 802.3z Gigabit Ethernet standard ● 1 X 1000Mbps fiber port (SX/LX connectors) ●...
  • Page 11: 1-Port 1000Base-T/ Sfp Interface Module- Mii-Sfp

    LED DEFINITION Color Function Lit: indicate the link through that port is successfully established. LNK/ACT Green Blink: indicate that the switch is actively sending or re- ceiving data over that port. Orange Lit: indicate that port is operating in full-duplex mode. Table 7.
  • Page 12 LED DEFINITION SFP Mini GBIC interface Color Function Lit: indicate the link through that port is successfully established. LNK/ACT Green Blink: indicate that the switch is actively sending or re- ceiving data over that port. Orange Lit: indicate that port is operating in full-duplex mode. Table 8.
  • Page 13: Chapter 5 Installing Optional Modules

    Chapter 5 INSTALLING OPTIONAL MODULES You can purchase optional modules separately to meet the needs of your network. The process of installing optional modules is the same. Follow these steps to install the optional module: 1. Power off the Switch before installing the optional module. 2.
  • Page 14 This page is intentionally left blank...
  • Page 15 This page is intentionally left blank...
  • Page 16 This page is intentionally left blank...
  • Page 18 Part No.:2010-000021-004...

Table of Contents