HYPERICE Normatec Elite Operating Instructions Manual page 4

USE ZONEBOOST™
During your session, you can increase the intensity of a single zone with the ZoneBoost feature.
ZoneBoost is designed to be used when you want extra attention in a specific area. ZoneBoost will add
an extra 60 seconds of massage time, as well as 10 mmHg increased pressure, in the selected zone.
ZoneBoost can be enabled before or during a session. Only one zone can be boosted at a time. To boost
a zone press the ZoneBoost button until the display shows the number of the zone you want to boost. To
disable ZoneBoost press the ZoneBoost button until the display shows " – ".
The zones on the attachment are numbered in ascending order from distal zone to proximal zone.
Zone 1 would be your foot/ankle, Zone 2 would be your calf, Zone 3 your knee, Zone 4 lower quad and
Zone 5 upper quad.
START THE SESSION
To start the session, tap the Start/Stop button.
PATENTED NORMATEC PULSE MASSAGE PATTERN
Before the patented Normatec Pulse massage pattern begins, you will experience a pre-inflate cycle,
during which the inflatable boots are calibrated to your exact body shape. Once the pre-inflate cycle is
complete, the patented Normatec Pulse massage pattern will begin by compressing your feet. Similar
to the kneading and stroking performed during a massage, each zone of the boots will first compress in
a pulsing manner and then release as the compression pattern works its way up your leg. When the top
zone completes its massage, there will be a brief rest period and then the cycle will begin again. This will
repeat until the session time runs out. When the session is resumed after a pause, the device will perform
a pre-inflate cycle before continuing.
STOP OR PAUSE THE SESSION
To stop the session at any time, tap the Start/Stop button. This will pause the session. To restart your
paused session, tap the Start/Stop button again. If you are done using the device, turn off the device by
pressing the power button and remove the inflatable boots from your limbs.
To remove the boots, fully unzip the garment and then remove.
FINISH THE SESSION
The session will continue massaging until time runs out and the display reads Finishing Cycle. The device
will continue until the current cycle is finished. When the session is completed, turn off the control unit by
pressing the power button and remove the boots from your limbs.
To remove the boots, fully unzip the garment and then remove.
TURN OFF THE CONTROL UNIT
To turn off the device, press the power button and confirm that the LED indicators and display is off.
USING HYPERSYNC™
Your Normatec Elite devices arrive paired, which means they will inflate and deflate on the same cycle.
To unpair devices, press and hold the Start / Stop button on either device until the device screen reads
"Unpaired!" and the white pairing indicator light is no longer illuminated. To pair your devices, turn on both
devices by pressing and holding the power (ON/OFF) button. Then press and hold Start / Stop button on
either control unit until the display screen says "Pairing!" Finally, press and hold the Start / Stop button on
the other device until both devices say "Pairing!" and the white pairing indicator light is illuminated.
CONNECTING TO THE HYPERICE APP
Download the Hyperice App from the App Store or the Google Play Store. To connect your device to
the Hyperice App via Bluetooth® make sure that your device is turned on, Bluetooth® is turned on in
your phone, and your device is within range of your phone. If prompted, tap "Scan for Devices." Select
your device when it pops up on the screen. The blue LED on the control unit will light up when you have
successfully connected to your mobile device. Once you pair your Normatec Elite, HyperSmart™ will allow
you to automatically start your session and control the within the Hyperice App.
CYBERSECURITY
It is recommended to configure the Hyperice App for automatic updates to ensure cybersecurity. It is also
recommended to keep your Operating System up to date and to configure your Operating System for
automatic updates.
CLEANING THE DEVICE
To clean the control unit:
• Wipe down the device with a damp, clean cloth.
• Dry thoroughly with a clean cloth.
Cleaning the single-person use inflatable boot:
• Wipe it down inside and out with a damp, clean cloth.
• Dry thoroughly with a clean cloth.
• Do not machine wash or dry.
• Do not dry clean.
MAINTAINING THE DEVICE
The Normatec Elite requires no routine maintenance or service except for the care in this section.
STORING THE DEVICE
Store your Normatec Elite in a clean, dry location.
REPLACEMENT PARTS
Please call customer service at +1.949.565.4994 or visit our website at hyperice.com for information
regarding available replacement parts and accessories.
TECHNICAL INFORMATION
Do not attempt to take apart the device. The device has no user-serviceable parts. There are no user-
replaceable fuses.
BLUETOOTH WIRELESS TECHNOLOGY
The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc., and any use of such marks by Hyperice
is under license. In the unlikely event of loss of a stable Bluetooth connection, the device will attempt to
re-establish its connection automatically. The Normatec Elite control unit is completely autonomous, and will
continue operating normally, even during a loss of connectivity. If this control unit does cause interference,
which can be determined by turning the control unit off and on, the user is encouraged to try to correct the
interference by reorienting or relocating the control unit, increasing the separation between equipment and
the control unit, or connecting the control unit to a different outlet on a circuit if it is plugged in.
The Normatec Elite control unit uses Bluetooth 5.0 wireless technology with the following radio specifications:
FCC ID: 2AY3Y-NTE
IC: 23655-NTE
Frequency
Modulations
Transmit Power
Security
FCC ID: 2AY3Y-NTE IC:23655-NTE
See device label for details.
This control unit complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This control unit may not cause harmful interference, and (2) this control unit must accept
any interference received, including interference that may cause undesired operation. This control
unit complies with Innovation, Science and Economic Development Canada's license-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) this control unit may not cause
interference, and (2) this control unit must accept an interference, including interference that may cause
undesired operation of the device.
This equipment complies with FCC/ISED radiation exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the ISED
radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that are deemed to
comply without testing of specific absorption rate (SAR).
Cet équipement est conforme aux limites d'exposition aux rayonnements FCC/ISED établies pour un
environnement non contrôlé et respecte les directives d'exposition aux radiofréquences (RF) de la FCC
et les règles d'exposition aux radiofréquences (RF) RSS-102 de l'ISED. Cet équipement présente de très
faibles niveaux d'énergie RF qui sont jugés conformes sans test du débit d'absorption spécifique (SAR).
FCC ID: 2AY3Y-NTEA
IC:23655-NTEA
2402 to 2480 MHz, 433.920 MHz
GFSK
+4 dBm
AES HW
FCC ID: 2AY3Y-NTEA IC:23655-NTEA