Hyperice Hypervolt 2 Pro Manual
Also See for Hypervolt 2 Pro:

Advertisement

Hyperice Hypervolt 2 Pro Manual

INTRODUCTION

The Hypervolt 2 Pro is a handheld percussion massage device that delivers targeted pulses of pressure to care for muscles, relieve tension, provide a relaxing massage, accelerate warmup and recovery, and help maintain flexibility and range of motion.

OPERATING

Switch your Hypervolt 2 Pro to the ON position at the base of the handle. The LED band on the handle will illuminate indicating the battery level. Turn the digital speed dial clockwise to the desired speed setting indicated by the LED lights illuminating on the face of the control panel. Your Hypervolt 2 Pro is now ready for use. The lowest speed is at the nine o'clock position and the highest speed is at the twelve o'clock position. Turning the dial clockwise will increase the speed. To turn off the percussion, rotate the digital control dial counter clockwise until all five of the LEDs are turned off.

CONNECTING TO THE HYPERICE APP

To connect your device to the Hyperice App via Bluetooth® make sure that your device is turned on, Bluetooth® is turned on in your phone, and your device is within close proximity. Select a routine within the Hyperice App and if prompted tap "Scan for Devices." Select your device when it pops up on the screen. HyperSmart™ will automatically start your device and adjust the speed and intensity as you follow along with the routine.

SPECIFICATIONS

SPECIFICATIONS

  1. Digital speed dial
  2. Interchangeable head attachments (5)
  3. Speed indicators (5)
  4. Pressure sensor indicators
  5. Bluetooth® connection indicator
  6. Removable battery release
  7. Handle/rechargeable lithium-ion battery
  8. Battery level indicator (LED band)
  9. ON/OFF power switch
  10. Charging port

AC-DC Charger: 100-240V - 50/60Hz 0.7A - 18.0V1.0A 18.0 W
Rechargeable lithium ion battery 5000mAh
Frequency: Level 1 - 1700/28 Hz, Level 2 - 1900/32 Hz, Level 3 - 2100/35 Hz,
Level 4 - 2400/40 Hz, Level 5 - 2700/45 Hz
Weight: 2.6 lbs/1.18 kg
Temperature (operating): +32°F to +113°F [0°C to +45°C]
Temperature (storage): -4°F to +77°F [-20°C to +25°C]

IMPORTANT SAFETY INSTRUCTIONS

shock hazardTO REDUCE RISKS OF ELECTRIC SHOCK, FIRE, AND PERSONAL INJURY, OR PROPERTY DAMAGE, THIS DEVICE MUST BE USED IN ACCORDANCE WITH THE FOLLOWING WARNINGS, CAUTIONS, AND SAFETY INSTRUCTIONS.
When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using the Hypervolt 2 Pro.


To reduce the risk of electric shock:

  • Always unplug this device from the electrical outlet immediately after using and before cleaning.
  • Do not reach for a device that has fallen into water. Unplug immediately.
  • Do not use while bathing or in a shower.
  • Do not place or store device where it can fall or be pulled into a tub or sink. Do not place in or drop into water or other liquid.


To reduce the risk of burns, fire, electric shock, or injury to persons:

  • A device should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on or taking off parts.
  • Do not operate under blanket or pillow. Excessive heating can occur and cause fire, electric shock, or injury to persons.
  • This device can be used by children aged from 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
  • Use this device only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
  • Never operate this device if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or if it has gotten wet. Return the device to a service center for examination and repair.
  • Do not carry this device by supply cord or use cord as a handle.
  • Keep the cord away from heated surfaces.
  • Never operate the device with the air openings blocked. Keep the air openings free of lint, hair, or any substance which may impair the flow of air.
  • Never drop or insert any object into any opening.
  • Do not use outdoors.
  • Do not operate where aerosol (spray) devices are being used or where oxygen is being administered.
  • Never operate on a soft surface such as a bed or couch where the air openings may be blocked.
  • Do not use device in close proximity to loose clothing or jewelry.
  • Keep long hair away from device while in use.
  • Cleaning and user maintenance shall not be done by children without supervision.
  • Do not remove screws or attempt to disassemble.
  • Do not operate continuously for more than one hour. After one hour use, allow device to rest for 30 minutes before re-using.
  • Unplug the device after charging and prior to use.
  • Use device only according to Operating Instructions.
  • When using the Hypervolt 2 Pro use only on dry, clean surfaces of the body by lightly pressing and moving across the body for approximately sixty(60) seconds per region. The Hypervolt 2 Pro should only be used on soft tissue areas of the body and should not be used on any hard or bony areas of the body, including the head. Please immediately stop use of the Hypervolt 2 Pro upon experiencing any pain or discomfort, apart from light muscle soreness. Bruising can occur from use of the Hypervolt 2 Pro, regardless of the pressure setting, and if bruising does occur you should not use the Hypervolt 2 Pro on the bruised area until the bruise is fully healed. Use of the Hypervolt 2 Pro should also be avoided on all bruises, contusions, rashes or irritated or injured areas of the skin until they are fully healed. When using the Hypervolt 2 Pro be sure to keep fingers, toes, hair, and other body parts away from the back of the attachment head to avoid pinching or hair entanglement.


The Hypervolt 2 Pro should only be charged with the double insulated, 18VDC Hyperice charger (model number MX24Z2-1801000) that was supplied with the device. Do not charge the Hypervolt 2 Pro overnight or leave the Hypervolt 2 Pro unattended when charging or in use.
Please do not use the Hypervolt 2 Pro, or any percussion device without first obtaining approval from your physician if any of the following apply:

  • Pregnancy, diabetes with complications such as neuropathy or retinal damage, wear of pacemakers, recent surgery or injury, epilepsy or migraines, herniated disks, spondylolisthesis, spondylolysis, or spondylosis, recent joint replacements or IUD, metal pins or plates or any concerns about your physical health. Frail individuals and children should be accompanied by an adult when using any percussion or vibration device. These contraindications do not mean that you are not able to use a percussion or vibration device but we advise that before doing so you consult your physician. Ongoing research is being done on the effects of percussion massage for specific medical disorders that may result in the shortening of the list of contraindications as shown above.

The Hypervolt 2 Pro contains a battery which must be complied with safely at an appropriate e-waste disposal or recycling facility.


The battery used in this device may present a risk of fire or chemical burn if mistreated. Do not disassemble, heat above 100º C or incinerate. Dispose of used battery promptly. Keep away from children.
For household use only.
Prevent unintentional starting. Ensure the switch is in the off position before picking up or carrying the appliance. Carrying the appliance with your finger on the switch or energizing appliance that have the switch on invites accidents.
Disconnect the battery pack from the appliance before making any adjustments, changing accessories, or storing appliance. Such preventive safety measures reduce the risk of starting the appliance accidentally. Recharge only with the charger specified by the manufacturer.
Use appliances only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
Do not expose an appliance to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause explosion.
Follow all charging instructions and do not charge the appliance outside of the temperature range specified in the instructions.
Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire. Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
Do not modify or attempt to repair the appliance except as indicated in the instructions for use and care.
SAVE THESE INSTRUCTIONS

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Hyperice Hypervolt 2 Pro Manual

Advertisement

Need help?

Need help?

Do you have a question about the Hypervolt 2 Pro and is the answer not in the manual?

Questions and answers

Table of Contents