Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for HIKOKI NT 1865DAA
Summary of Contents for HIKOKI NT 1865DAA
- Page 1 NT 1865DAA • NT 1865DSA NT1865DAA NT1865DSA Handling instructions...
- Page 2 < NT1865DAA > < NT1865DSA> New Zealand model of NT1865DSA...
- Page 3 <NT1865DAA> <NT1865DSA> 34° 2.4 mm 2.8 mm 1.4 mm 1.65 mm 1.8 mm...
- Page 4 New Zealand model of NT1865DSA New Zealand model of NT1865DSA New Zealand model of NT1865DSA For New Zealand model of NT1865DSA specifications, nailing operation mode cannot be switched.
- Page 6 New Zealand model of NT1865DSA For New Zealand model of NT1865DSA specifications, operation cannot be switched over to continuous operation (push lever fire) method.
-
Page 8: General Power Tool Safety Warnings
c) Prevent unintentional starting. Ensure the GENERAL POWER TOOL SAFETY switch is in the off position before connecting WARNINGS to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch WARNING or energising power tools that have the switch on Read all safety warnings and all instructions. -
Page 9: Additional Safety Warnings
b) Use power tools only with specifically 3. Always wear eye protection (protective goggles). designated battery packs. Use of any other battery packs may create a risk of injury and fire. c) When battery pack is not in use, keep it away from other metal objects, like paper clips, When operating the power tool, always wear eye coins, keys, nails, screws or other small metal... - Page 10 ○ Keep the firing head down. 4) clearing a jam; Strictly observe the above instructions, and always 5) it is not in use; make sure that no part of the body, hands or legs is 6) leaving work area; ever in front of the nail outlet. 7) moving it to another location;...
-
Page 11: Caution On Lithium-Ion Battery
37. Do not give a strong shock to the operation panel 8. Do not use in a location where strong static electricity or break it. It may lead to a trouble. generates. 38. Do not use the product if the tool or the battery 9. -
Page 12: Names Of Parts
Battery level indicator lamp USB DEVICE CONNECTION PRECAUTIONS (UC18YSL3) Charge indicator lamp Latch When an unexpected problem occurs, the data in a USB device connected to this product may be corrupted or lost. LED light Always make sure to back up any data contained in the USB device prior to use with this product. -
Page 13: Nail Selection
NOTE Due to HiKOKI’s continuing program of research and Do not use on scaffoldings, ladders. development, the specifications herein are subject to change without prior notice. Warning 2. Battery Model Voltage Battery capacity Prohibited action BSL36A18X 36 / 18 V* 2.5 / 5.0 Ah*... -
Page 14: Before Use
– If the cooling fan is not operating, contact a HiKOKI has been fully inserted. Authorized Service Center for repairs. *2 Battery overheated. Unable to charge. - Page 15 (4) Select Nailing operation mode If abnormal operation occurs, stop using the Nailer and (Full sequential actuation / Contact actuation) contact a HiKOKI authorized service center immediately. After power switch turn ON, always set in Full sequential actuation mode as initial. (Nailing operation (1) REMOVE ALL NAILS AND BATTERY FROM NAILER.
- Page 16 Depress the push lever against the workpiece within ○ Before starting work, check the nailing operation 2 seconds. switching device. This HiKOKI nailer includes a nailing operation – THE NAILER MUST OPERATE. switching device. Before starting work, make sure that the switching (9) If no abnormal operation is observed, you may load device is properly set.
- Page 17 [2]–[5] as required. 2) turning the adjuster. NOTE This HiKOKI nailer is equipped with a nailer operation Operations [3] and [4] should be done within 2 seconds switching device. of each other. If more than 2 seconds pass after [3], the Use FULL SEQUENTIAL ACTUATION MECHANISM or Nailer will not work properly.
-
Page 18: Maintenance And Inspection
If the tip of the driver blade becomes worn, nail jamming safety regulations and standards prescribed in each is more likely to occur. country must be observed. In case of frequent jam, contact a HiKOKI authorized service center. MAINTENANCE AND INSPECTION WARNING Be sure to remove all remaining fasteners and battery from the nailer before maintenance and inspection. -
Page 19: Troubleshooting
Important notice on the batteries for the HiKOKI NOTE cordless power tools Due to HiKOKI’s continuing program of research and Please always use one of our designated genuine development, the specifications herein are subject to batteries. We cannot guarantee the safety and change without prior notice. - Page 20 PROBLEM CHECK METHOD CORRECTION Weak drive. Driver blade worn? Contact HiKOKI for replacement. Slow to cycle. Compressed air pressure has become low. Damaged internal electronics. Drives too deep. Check position of nailing depth Readjust according to “HOW TO adjustment adjuster.
- Page 21 NT1865DAA NT1865DSA (2XCP) (NN) (2XCP) (NN) — — BSL36A18X — — UC18YSL3 — — — —...
- Page 22 BSL18.. BSL36..18 UC18YSL3 (14.4 V–18 V) 875769 329897 382165 337528 944458...
- Page 24 Shinagawa Intercity Tower A, 15-1, Konan 2-chome, Minato-ku, Tokyo, Japan Code No. C99751512 G Printed in China...
Need help?
Do you have a question about the NT 1865DAA and is the answer not in the manual?
Questions and answers