1. Manuals
  2. Brands
  3. HIKOKI Manuals
  4. Nail Gun
  5. NR 1890DCA
  6. Handling instructions manual

HIKOKI NR 1890DCA Handling Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
NR 1890DCA
Handling instructions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NR 1890DCA and is the answer not in the manual?

Questions and answers

Related Manuals for HIKOKI NR 1890DCA

Summary of Contents for HIKOKI NR 1890DCA

  • Page 1 NR 1890DCA Handling instructions...
  • Page 2 New Zealand product...
  • Page 3 Paper collated strip nails Clipped-head nails . n i 6.8 mm 7.7 mm 2.9 mm 3.3 mm...
  • Page 4 New Zealand product New Zealand product...
  • Page 5 New Zealand product For New Zealand product specifications, nailing operation mode cannot be switched.
  • Page 6 New Zealand product For New Zealand product specifications, operation cannot be switched over to continuous operation (push lever fire) method.

  • Page 8: General Power Tool Safety Warnings

    c) Prevent unintentional starting. Ensure the GENERAL POWER TOOL SAFETY switch is in the off position before connecting WARNINGS to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch WARNING or energising power tools that have the switch on Read all safety warnings and all instructions.

  • Page 9: Additional Safety Warnings

    b) Use power tools only with specifically 3. Always wear eye protection (protective goggles). designated battery packs. Use of any other battery packs may create a risk of injury and fire. c) When battery pack is not in use, keep it away from other metal objects, like paper clips, When operating the power tool, always wear eye coins, keys, nails, screws or other small metal...
  • Page 10 ○ Keep the firing head down. 5) leaving work area; Strictly observe the above instructions, and always 6) moving it to another location; and make sure that no part of the body, hands or legs is 7) handing it to another person. ever in front of the nail outlet.

  • Page 11: Caution On Lithium-Ion Battery

    ○ Prior to use, make sure that swarf and dust have not 10. Do not immerse the battery or allow any fluids to flow collected in the area of the terminals. inside. Conductive liquid ingress, such as water, can ○ During use, try to avoid swarf or dust on the tool from cause damage resulting in fire or explosion.

  • Page 12: Names Of Parts

    Please be aware that our company accepts absolutely no Nails responsibility for any data stored in a USB device that is corrupted or lost, nor for any damage that may occur to a Blade guide connected device. Adjuster WARNING ○ Prior to use, check the connecting USB cable for any Hook plate defect or damage.

  • Page 13: Specifications

    ON/OFF at 0.5 sec. intervals NOTE (RED) Before charging * Due to HiKOKI’s continuing program of research and development, the specifications herein are subject to change without prior notice. Lights for 0.5 sec. at intervals of Charged at less than...

  • Page 14: Before Use

    – If the cooling fan is not operating, contact a HiKOKI *2 Battery overheated. Unable to charge. Authorized Service Center for repairs. Although charging will start once the battery has cooled 4.
  • Page 15 “Full sequential” and “Contact”. following order. Lighting (Blue): If abnormal operation occurs, stop using the Nailer and FULL SEQUENTIAL ACTUATION MECHANISM, contact a HiKOKI authorized service center immediately. Blinking (Blue): CONTACT ACTUATION MECHANISM (1) REMOVE ALL NAILS AND BATTERY FROM NAILER. NOTE New Zealand product specifications are only equipped –...
  • Page 16 (9) If no abnormal operation is observed, you may load switching device. nails in the Nailer. This HiKOKI nailer includes a nailing operation Drive nails into the workpiece that is the same type to switching device. be used in the actual application.
  • Page 17 To continue nailing in a separate location, move the nailer 2) turning the adjuster. along the wood, repeating steps [2]–[5] as required. This HiKOKI nailer is equipped with a nailer operation NOTE switching device. Operations [3] and [4] should be done within 2 seconds Use FULL SEQUENTIAL ACTUATION MECHANISM or of each other.

  • Page 18: Maintenance And Inspection

    NOTE If the tip of the driver blade becomes worn, nail jamming is more likely to occur. In case of frequent jam, contact a HiKOKI authorized service center. MAINTENANCE AND INSPECTION WARNING Be sure to remove all remaining fasteners and battery from the nailer before maintenance and inspection.

  • Page 19: Troubleshooting

    Important notice on the batteries for the HiKOKI cordless power tools Please always use one of our designated genuine batteries. We cannot guarantee the safety and performance of our cordless power tool when used with NOTE batteries other than these designated by us, or when the Due to HiKOKI’s continuing program of research and...
  • Page 20 PROBLEM CHECK METHOD CORRECTION Weak drive. Driver blade worn? Contact HiKOKI for service. Slow to cycle. Compressed air pressure has become low. Damaged internal electronics. Drives too deep. Check position of nailing depth Readjust according to “HOW TO adjustment adjuster.
  • Page 21 NR1890DCA (2XCPZ) (NN) — BSL36A18X — UC18YSL3 — —...
  • Page 22 BSL18.. BSL36..18 UC18YSL3 (14.4 V–18 V) 329897 337528...
  • Page 24 Shinagawa Intercity Tower A, 15-1, Konan 2-chome, Minato-ku, Tokyo, Japan Code No. C99751613 G Printed in China...

Table of Contents