Equity 31008 Manual

CLEAR DIGITAL
AL A R M CLO CK
MODEL: 31008
DC: 053024
POW E R U P
Insert 1-AA battery according to polarity.
T I M E S E T T I N G
1. Move the Rotating Switch to the TIME SET position.
2. Press and release the HR button to the desired hour. "P" will
show for PM hours.
3. Press and release the MIN button to the desired minutes.
4. Move the Rotating Switch to the AL OFF position.
A L A R M T I M E S E T T I N G & OP E R AT I O N
1. Move the Rotating Switch to the ALARM SET position.
2. Press and release the HR button to the desired hour. "P" will
show for PM hours.
3. Press and release the MIN button to the desired minutes.
4. Move the Rotating Switch to the AL OFF position.
A L A R M ON / O F F
1. Move the Rotating Switch to the AL ON position to activate the
alarm.
2. Move the Rotating Switch to the AL OFF position to deactivate
the alarm.
S N OOZE
When alarm sounds, press the SNOOZE button to silence alarm for
4 minutes. Snooze function can be repeated many times if desired.
B AC KL I G HT
Press the SNOOZE button to illuminate the time briefly.
Page 2
STAY I N TO U C H
Ask questions, watch set up videos, and provide feedback on our social
media outlets. Follow La Crosse Technology on Youtube, Facebook,
Instagram, and X (Twitter).
S P E C I FI CAT I O N S
Power: 1-AA battery (alkaline preferred
Dimensions: 3.54 in L x 2.17 in D x 1.57 in H
CA RE & MA I NT EN A N C E
• Always purchase the correct size and grade of battery most
suitable for intended use.
• Clean the battery contacts and also those of your clock prior to
battery installation.
• Ensure the battery is installed with correct polarity (+ and –).
• Remove battery from equipment when it is not used for an
extended period of time.
• Promptly remove an expired battery.
Page 3