Equity 31003 Quick Start Manual

DIGITAL LCD
A L A R M CLO CK
MODEL: 31003
DC: 082323
POW E R U P
Insert 1-AA battery according to polarity.
T I M E S E T T I N G
1. Hold the T-SET button. While holding the T-SET button, press
HOUR button to set your hour. Note: The PM Indicator
will appear when you advance to PM time. Press MIN button to
set your minutes.
2. When the correct time is shown on the display, release the
T-SET button.
A L A R M T I M E S E T T I N G & OP E R AT I O N
1. Hold the AL-SET button. While holding the ALARM button, press
HOUR button to set your hour. Note: The PM Indicator
will appear when you advance to PM time. Press MIN button to
set your minutes.
2. When the correct time is shown on the display, release the AL-
SET button.
A L A R M ON / O F F
1.Slide the ALARM switch to ON to activate the alarm. Slide the
ALARM switch to OFF to deactivate the alarm.
2. When the alarm time is reached, the alarm will sound for 1
minute if not turned Off.
S N OOZE
When alarm sounds, press the SNOOZE/LIGHT button to silence
alarm for 4 minutes. Snooze function can be repeated many times
if desired.
Page 2
BAC K L I G H T
Press the SNOOZE/LIGHT button to illuminate the time briefly.
JO I N T H E C O N V E R SAT I O N
Ask questions, watch detailed setup videos, and provide feedback
on our La Crosse Technology social media outlets!
S P E C I FI CAT I O N S
Power: 1-AA battery (alkaline preferred
Dimensions: 1.50"H x 3.50"W x 3.00"D
CA RE & MA I NT EN A N C E
• Always purchase the correct size and grade of battery most
suitable for intended use.
• Clean the battery contacts and also those of your clock prior to
battery installation.
• Ensure the battery is installed with correct polarity (+ and –).
• Remove battery from equipment when it is not used for an
extended period of time.
• Promptly remove an expired battery.
Page 3