Related Manuals for Beijer Electronics GT-5114
Summary of Contents for Beijer Electronics GT-5114
- Page 1 User Manual GT-5114 High Speed Counter Module 4 ch, 0 - 100 kHz, 24 VDC, cage clamp, 10 pt removable terminal Doc ID: 150882 2025-02-20...
- Page 2 The information in this document is subject to change without notice and is provided as available at the time of printing. Beijer Electronics AB reserves the right to change any information without updating this publication. Beijer Electronics AB assumes no responsibility for any errors that may appear in this document.
-
Page 3: Table Of Contents
9. Hardware Setup ..................19 9.1. Space Requirements ................19 9.2. Mount Module to DIN Rail ..............20 9.3. Mount Removable Terminal Block ............. 22 9.4. Connect Cables to Removable Terminal Block ..........23 Beijer Electronics, Doc ID: 150882 2025-02... -
Page 5: About This Manual
About This Manual 1. About This Manual This manual contains information on the software and hardware features of the Beijer Electronics GT-5114 High Speed Counter Module. It provides in-depth specifications, guidance on installation, setup, and usage of the product. 1.1. Symbols Used in This Manual This publication includes Warning, Caution, Note and Important icons where appropriate, to point out safety-related, or other important information. -
Page 6: Safety
Before using this product, please read this manual and other relevant manuals carefully. Pay full attention to safety instructions! In no event will Beijer Electronics be responsible or liable for damages resulting from the use of this product. The images, examples and diagrams in this manual are included for illustrative purposes. Because of the many variables and requirements associated with any particular installation, Beijer Electronics cannot take responsibility or liability for actual use based on the examples and diagrams. -
Page 7: About The G-Series System
IP, EtherCAT, PROFINET, CC-Link IE Field, PROFIBUS, CANopen, DeviceNet, CC-Link, MODBUS/Serial etc. • Expansion Module - Expansion module types: Digital IO, Analog IO, and Special modules. • Messaging - The system uses two types of messaging: Service messaging and IO messaging. Beijer Electronics, Doc ID: 150882 2025-02... -
Page 8: Io Process Data Mapping
Valid parameter data depends on the modules in use. For example, analog modules have settings of either 0-20 mA or 4-20 mA, and temperature modules have settings such as PT100, PT200, and PT500. The documentation for each module provides a description of the parameter data. 2025-02 Beijer Electronics, Doc ID: 150882... -
Page 9: Specifications
Not used. Field power bypass to next expansion module Wiring IO cable max. 2.0 mm² (AWG 14) Torque 0.8 Nm (7 Ib-in) Weight 60 g Module size 12 mm x 99 mm x 70 mm Beijer Electronics, Doc ID: 150882 2025-02... -
Page 10: Input Specifications
1-Input mode: Up, Down, Frequency measurement, Pulse width, Period measurement. 2-Input mode: Encoder 4x, Encoder 2x, Up / Inhibit, Up / Reset, Down / Inhibit, Down / Reset, Up / Down, Clock / Direction. Counter size 32 bit-wide/channel 2025-02 Beijer Electronics, Doc ID: 150882... -
Page 11: Wiring Diagram
Wiring Diagram 5. Wiring Diagram Pin no. Signal description Counter input Ch#0 COM0 Counter input Ch#1 COM1 Counter input Ch#2 COM2 Counter input Ch#3 COM3 Shield Shield Beijer Electronics, Doc ID: 150882 2025-02... -
Page 12: Led Indicator
LED color Counter input Ch#0 Green Counter input Ch#1 Green Counter input Ch#2 Green Counter input Ch#3 Green LED channel status Status LED is Indication No signal Normal operation On signal Green Normal operation 2025-02 Beijer Electronics, Doc ID: 150882... -
Page 13: Mapping Data From The Image Table
Up counter. Counter input Ch#0 - 3 act as Up clock (0x0) to Ch#0 - 3. B’ 0001 Down Down Counter. Counter input Ch#0 - 3 act as Down (0x1) clock to Ch#0 - 3. Beijer Electronics, Doc ID: 150882 2025-02... - Page 14 • Counter input Ch#1 acts as Inhibit input to Ch#0. If Counter mode Ch#2 = 0x6, Counter mode Ch#3 is not used. • Counter input Ch#2 acts as Down clock input to Ch#2. • Counter input Ch#3 acts as Inhibit input to Ch#2. 2025-02 Beijer Electronics, Doc ID: 150882...
- Page 15 • Counter input Ch#2 acts as Clock input to Ch#2. • Counter input Ch#3 acts as Direction input to Ch#2. ( Direction input : Low = Up Count, High = Down Count ) Beijer Electronics, Doc ID: 150882 2025-02...
- Page 16 Simple pulse width measurement, 0.1 us unit. ( 0xE ) measurement *** • Pulse width (32 bit), if 1234, then Pulse high (on) width is 123.4 us. *** • Counter input Ch#0, Ch#2 act as Pulse input to Ch#0, Ch#2. 2025-02 Beijer Electronics, Doc ID: 150882...
- Page 17 *** Pulse width, B’1110(0xE) measures Pulse input’s high (on) Pulse width (32 bit) in 0.1 us unit. **** Pulse width and period, B’1111(0xF) measures Pulse input’s high (on) width (16 bit) and period (16 bit) in 0.1 us unit. Beijer Electronics, Doc ID: 150882 2025-02...
-
Page 18: Parameter Data
Parameter Data 8. Parameter Data Valid parameter length: 4 bytes Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Reserved Reserved Reserved Reserved 2025-02 Beijer Electronics, Doc ID: 150882... -
Page 19: Hardware Setup
Installation position is valid vertical and horizontal. The drawings are illustrative and may be out of proportion. CAUTION NOT following the space requirements may result in damaging the product. Beijer Electronics, Doc ID: 150882 2025-02... -
Page 20: Mount Module To Din Rail
• GT-5XXX • GT-7XXX GN-9XXX modules have three locking levers, one at the bottom and two on the side. For mounting instructions, refer to Mount GN-9XXX Module. Mount to DIN rail Dismount from DIN rail 2025-02 Beijer Electronics, Doc ID: 150882... - Page 21 9.2.2. Mount GN-9XXX Module To mount or dismount a network adapter or programmable IO module with the product name GN-9XXX, for example GN-9251 or GN-9371, see the following instructions: Mount to DIN rail Dismount from DIN rail Beijer Electronics, Doc ID: 150882 2025-02...
-
Page 22: Mount Removable Terminal Block
Hardware Setup 9.3. Mount Removable Terminal Block To mount or dismount a removable terminal block (RTB), see the instructions below. Mount a removable terminal block Dismount a removable terminal block 2025-02 Beijer Electronics, Doc ID: 150882... -
Page 23: Connect Cables To Removable Terminal Block
To connect/disconnect cables to/from the removable terminal block (RTB), see the instructions below. WARNING Always use the recommended supply voltage and frequency to prevent damage to the equipment and ensure optimal performance. Connect cable Disconnect cable Beijer Electronics, Doc ID: 150882 2025-02...
Need help?
Do you have a question about the GT-5114 and is the answer not in the manual?
Questions and answers