Shark POWERDETECT HZ4000 Series Owner's Manual page 3

(Click)
1. Insert Wand into Floor Nozzle.
3
(Snap)
3. Snap the Onboard Storage Clip onto
the wand, then place accessories in
the holder. Ensure all connections click
securely into place.
5
(Turn to
Click)
5. To lock and engage the dial, rotate it
counterclockwise until it clicks into the
desired odor intensity setting.
s h a r kc l e a n . c o m
ASSEMBLY
1
(Click)
2. Insert Handheld Vacuum into wand.
4. Remove Odor Neutralizer Technology
Dial from bag. Flip up the dial handle,
align the teal arrows, then insert the dial
into the nozzle.
2
POWER BUTTON
Press the Power button to turn the
vacuum on/off.
4
DETECT
In Detect mode, Floor Detect technology
automatically senses carpets and hard floors
and adjusts the brushroll speed for optimal
performance.
HARD FLOOR
Press the Mode Button to deactivate Floor
Detect and switch to the manual Hard Floor
mode for surfaces like wood or tile.
NOTE: For deep cleaning per ASTM F608 (embedded dirt in carpets) please use the Carpet setting.
NOTE: Select Carpet for stuck-on dust and debris.
CONTROLS
MODE BUTTON
Press the Mode button to toggle between
Detect, Hard Floor, and Carpet settings.
FLOOR DETECT™ TECHNOLOGY
FLOOR DETECT DISPLAY
The Floor Detect display indicates which
surface type has been detected.
(L)-Hard Floor
(R)-Carpet
MANUAL SURFACE MODES
CARPET
Press the Mode button again to switch to the
manual Carpet mode for both low and high
pile carpets.
s h a r kc l e a n . c o m